Permanent Press I
A load cooling spray rinse reduces wrinkling.
Permanent Press II
During the wash cycle, the timer reaches PAUSE, and the washer cools down the load by replacing some of the wash water with rinse water. This helps to reduce wrinkling.
Ultra Clean
You may select this cycle for most loads.
Prewash
Helps to remove heavy sells and stains that need pretreatment. This cycle should be followed by an Ultra Clean or Permanent Press cycle with additional detergent.
Automatic 2nd Rinse
Removes excess detergent residue. May be automatically added to the Ultra Clean or Permanent Press cycles. Set the RINSE OPTIONS Control to 2nd Rinse before you star_ the washer. You won't have to come back later to select a second rinse.
Soak
Features agitation followed by unlimited soak time to help remove heavy soils and stains that need pretreatment. After the soaking has finished, you should reset the washer to a Spin setting to remove water. The Soak cycle should be followed by an Ultra Clean or Permanent Press cycle with additional detergent.
Rinse & Spin
May be used when an extra rinse is needed to remove additional detergent residue. Set WATER LEVEL Control, then WATER TEMPERATURE Control. Set RINSE OPTIONS Control to One
Rinse, and set the SPEEDS Control. You should then set Cycle Selector (Timer) Control to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics by removing excess water. Set RINSE OPTIONS Control to One Rinse, and set the SPEEDS Control. You should then set Cycle Selector (Timer) Control to a Spin setting.