To select a
WASH WATER TEMPI CRATURE
HOT WATER can be selected only
in the REGULARHEAVYCycle. Turn the Control Knob to12 or14 minutes in the REGULARHEAVYCycle.
Ail rinses use cold water. this saves energy and helps prevent wrinkles from sefflng into fabrics.
WARM WATER can be selected by turning the Control Knob to 8 ort0 min- utes in the REGULARHEAVYCycle.
lA warm wash is preset in the SHORT Cycle. Just turn the Control Knob to the 6 or 8 minute setting in that cycle.
To select a
3. WATER LEVEL
HIGH WATER LEVEL. The washer will automatically fill to its highest level, (about17.2 galsI65.1 L),when the Control Knob points to a FILLarea.
I 1 | lx\ | - | /////I |
LOWER WATER LEVELS. Setting the washer to fill with less water also sets it for a shorter wash time.
1.Push the Control Knob in and turn it clockwise to a FILLarea in the cycle you want.
2.Pull the Control Knob out; the washer will startto fill.
3.When the washer reaches the de-
sired water level, push in the Control Knob and slowlyturn it past the FILL area. Pull out the Control Knob to start the washer.
For ail rinses, the washer fills to its hlghest level with cold water.