Whirlpool LA34OOXM manual Starting Your washer, Select Cycle and Wash Time 1. Start the washer

Page 4

Starting		your washer
Before	starting	1.	Measure and		add	detergent.
your	washer:	2.	Place	sorted	load	in washer.
		3.	Start	washer.

_ Select CYCLE and WASH TIME; 1. Start the washer

FILL AREA

A. Push in the Control Knob and turn it to the right. It must be pushed in and turned only clockwise.

C. Start the washer by pulling out the Control Knob. After filling, the washer will agitate for the selected number of minutes.

B. Stop on a number in the cycle you want. The numbers are minutes of wash time. The drawing shows 6 minutes of agitation in the REGULAR HEAVY Cycle. NOTE: The washer will fill only when the knob points to a FILL area.

D. To stop the washer at any time push in the Control Knob. To restart the washer, pull out the Control Knob.

To set the controls for a rinse and spin or a drain and spin, see page 8.

Image 4

Contents Automatic Washer Parts and features Copy your Model and Serial Numbers hereYour responsibilities Select Cycle and Wash Time 1. Start the washer Starting Your washerFill Area To select To select aWhat happens in each cycle Regular Heavy CycleShort Cycle Do not Load Above Clothes GuardLoad Help with Rinsing For a rinse and spin Other operating instructionsFor a drain and spin Caring for your washer Some Pretreatment ProductsWinterizing If Your Washer Stops During a Cycle If Your Washer does not Spin~PPLIIHCES~HOUSEHOLD~ELECTRICIL*PPLIANCES~