To select
2. WASH WATER TEMPERATURE
l HOT WASH can be selected only in the REGULAR HEAVY Cycle.Turn the Control Knob so the pointer is on 14 or 12 minutes in the REGULAR HEAVY Cycle.
All rinses use cold water. This saves energy and helps pre- vent wrinkles from setting into fabrics.
l WARM WASH can be selected in the REGULAR HEAVY Cycle by moving the pointer to 10 or 8 minutes in the REGULAR HEAVY Cycle.
l A warm wash is
To select a
3. WATER LEVEL
H IGH LEVEL WATER. The washer
will automatically fill to its highest
level...aboutl7.2 gallons (65.1 L)...
when the Control Knob points to a FILLarea.
LOWER WATER LEVELS. Setting the washer to fill with less water also sets it for shorter wash time.
1.Push the Control Knob in and turn it clockwise to a fill area in the cycle you want.
2.Pull the Control Knob out; the
washer will start to fill.
3.When there is as much water as you want in the washer, push IN the Control Knob. SLOWLY turn the Con- trol Knob clockwise past the fill area. Pull out the knob to start the washer.
For all rinses, the washer fills to its highest level with cold water.
5