To select a
2. WASH WATER TEMPERATURE
HOT WATER con be selected only
in the REGULAR HEAVY Cycle Turn the Control Knob to12 or14 minutes In the REGULAR HEAVY Cycle
All rinses use cold water. This saves energy and helps prevent wrinkles from setting into fabrics.
WARM WATER can be selected by turning the Control Knob to 8 or10 min- utes in the REGULAR HEAVY Cycle.
l A worm wash is preset in the SHORT Cycle. Just turn the Control Knob to the 6 or 8 mrnute setting in that cycle.
To select a
3. WATER LEVEL
HIGH WATER LEVEL. The washer will
automatically fill to its highest level, (about17.2 gals 165.1L),when the Control Knob points to a FILLarea
LOWER WATER LEVELS. Setting the washer to fill with less water also sets it for a shorter wash time.
1.Push the Control Knob in and turn it clockwrse to Q FILLarea in the cycle you wont.
2.Pull the Control Knob out; the washer will start to fill
3.When the washer reaches the de- sired water level, push in the Control Knob and slowly turn it post the FILL area Pull out the Control Knob to start the washer.
For all rinses, the washer fills to its highest level with cold water.