Whirlpool LA3400XT manual Whathappensin eachcycle

3. Select a water level

l Setting the washer to fill with less water also sets it for shorter wash time (6 minutes).

-Push the Cycle Control Knob in and turn it clockwise to a FILL area in the REGULAR HEAVY Cycle.

-Pull the Cycle Control Knob out; the washer will start to fill.

-When the washer reaches the desired water level, push in the Cy- cle Control Knob and slowly turn un- til it points to the 6-minute mark in the REGULAR HEAVY Cycle. Pull out the Cycle Control Knob to start the washer.

NOTE: For best washing results, items should move freely in the washer. Do not overload the washer or choose a water level that is too low for your wash load.

lFor all rinses, the washer fills to its highest level with cold water.

Whathappensin eachcycle

Each cycle has been designed for dif- ferent kinds of fabrics. Numbers on the Cycle Control Knob in each cycle are the minutes of wash agitation time.

When the Cycle Control Knob is set to a number and pulled out, the washer fills before agitation and timing starts.

After agitation starts, the Cycle Control Knob turns clockwise until it points to OFF and the cycle ends.

NOTE: You may hear the sound of

water spraying during the spin parts of

some cycles. In all cycles, water is sprayed on the spinning load to help with the rinsing.

5