Before You Call

For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundry Tips pamphlet.

Check these points if your washer...

Always

Check First

Won’t Fill

Won’t Agitate

Won’t Spin

or Drain

•Plug cord into live electrical outlet.

•Check fuse or reset circuit breaker.

•Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

•Turn both faucets on fully.

•Straighten inlet hoses.

•Disconnect hoses and clean screens. Hose filter screens may be plugged.

•Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

•Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

•The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.

•Pauses are normal. Wait and see if the washer will start again.

•Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.

•Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

•The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.