Whirlpool TAWM400A warranty What happens in each, Cycle, Regular and Short cycles

Page 9

What happens in each

When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size with the selected water temperature) before agitation and timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.

The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

Regular and Short cycles

Fill to selected load size

Wash selected time

Drain-No agitation

Spin

M4 Fill

w Rinse

Drain-No agitation

Spin

cycle

Permanent Press cycle

Fill to selected load size

Wash selected time

u-+- Partial drain&o agitation

Fill to selected load size

Brief agitation

Drain-No agitation

Fill

Rinse

Drain-No agitation

Spin

Image 9

Contents UseAndCane ANote ToYou Your safety is important to usThank you for buying an Estate appliance PropertyUnderstanding your responsibilities Important SAFEl-Y InstructionsOther feature not shown KnowingYour Washefs FeaturesWasher Operating YourBefore starting your washer Starting or stopping your washerSelecting wash-rinse temperatures Water temperature tipsLoad size tips Short cycle Permanent Press cycleUsing drain and spin Using rinse and spinWhat happens in each CycleRegular and Short cycles Using the chlorine bleach dispenser Other FeaturesManual clean lint filter Into agitatorThis Before you washPreparing clothes for washing SortingLoading Suggestions Removing stainsPre-washing or soaking Stain removal rulesBeverage Stain removal guideGum CoffeeEgg Water Temperature WaterWater Chlorine bleach Using laundry aidsFabric softeners All-fabric bleachWashing special-care items Electric blankets, woolen blanketsAs flame-retardant. Follow Knits Pillows, stuffed toys Plastic, rubber Problem Solving laundering problemsCaring for your washer Saving energyWinterizing your washer Tf You Need Assistance Or Service Before calling for assistanceLid is open If you are not satisfied with how the problem was solved If you need serviceIf you need assistance If you need FSP replace- ment partsPage Estate