COURSE SELECT
This feature enables the user to select the various combination of SOAK, WASH, RINSE and SPIN. The Selection is effected by pressing this Course Select button and indicated by the glowing of the corresponding LED indicator in the panel. The default setting is WASH, RINSE and SPIN i.e. whenever the Power Switch is switched ON, these 3 processes will be selected by default and the corresponding LED lamps will glow. As the Course Select button is pressed further, the other selections can be made in the following sequence:
COURSE SELECT |
| PROGRAM |
|
| |
|
|
|
|
|
|
Power Switch ON(Default) |
| WASH |
| RINSE | SPIN |
First Press | SOAK | WASH |
| RINSE | SPIN |
Second Press |
| WASH |
|
|
|
Third Press |
| WASH |
| RINSE |
|
Fourth Press |
|
|
| RINSE | SPIN |
Fifth Press |
|
|
|
| SPIN |
If the user presses for the sixth time, the machine returns to default setting i.e., WASH, RINSE and SPIN cycle. Whenever Speedy Program is selected, the course is selected by default, as WASH, RINSE and SPIN and hence no other combinations are possible.
START/PAUSE BUTTON
This button is used to start or pause the cycle. Once all the settings are set, the user has to press this button to commence the cycle. Similarly, this button can also be pressed while the machine is operating to pause the operation. This facility may be used in case the Customer wants to add some more detergent or clothes in the middle of the cycle. Whenever the operation is paused, the user will get a continuous beep sound to indicate that the machine has been 'paused'. To restart the cycle, the button has to be pressed again.
LED INDICATORS
This is 2 sets of 4 each LED indicators provided in the control panel. This helps to indicate the status of the cycle in progress.
WASH PROGAMME
From the above details on the various controls available in this model, it is clear that the user can choose the combination of various course (SOAK, WASH, RINSE, and SPIN) and Programmer (NORMAL, SPEEDY, DELICATE, and HEAVY). The possible combinations for say a NORMAL cycle are
1.WASH RINSE & SPIN
2.SOAK WASH RINSE &SPIN
3.WASH ONLY
4.WASH AND RINSE
5.RINSE AND SPIN
6.SPIN ONLY
Thus each of NORMAL, DELICATE & HEAVY cycle can give 6 possible combinations resulting in 18 cycles. In case of SPEEDY cycle, the course options are preset as WASH, RINSE and SPIN and hence no other combinations can be chosen.
Thus, a total combination of 18 plus 1 SPEEDY cycle i.e. a total of 19 cycles is possible in this model.
This document is only intended for qualified technicians who are aware of the respective safety regulations.
Revised on 07/01/2003Subject to modification Document No. WOI/WM/2003/001