USER INSTRUCTIONS
?Load Laundry
?Fill required amount of Water Manually
?Add Detergent and Adjuncts as required
?Program the machine (Normal/Wash)
?Press Start
?M/C Washes as per the program and stops
?Water filling should be controlled manually. The in built pressure switch is provided to ensure minimum water level of 25 Ltrs. thus avoiding agitation without water.
?Fill fresh water for rinsing operation.
?Program the machine (Normal/Rinse and Spin)
?Press Start
?Machine Rinses as per the selected Program and stops.
?SPIN
?Spin action will take place only if water level comes below less than 12 Itrs. inside the TUB.
This document is only intended for qualified technicians who are aware of the respective safety regulations.
Revised on 07/01/2003Subject to modification Document No. WOI/WM/2003/001