Whirlpool 3953964 manual Starting Your Washer, Water Temp Use For Hot, Warm, Cold

Page 6

Starting Your Washer

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

2.(OPTIONAL) Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser (on some models). Bleach will be dispensed automatically during the wash part of the cycle.

■Never use more than 1 cup (250 mL) for a full load. Use less with a smaller load size.

■Follow the manufacturer’s directions for safe use.

■To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket.

■Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see "Adding Liquid Chlorine Bleach."

3.Close the washer lid.

4.Turn the WATER LEVEL selector to the correct setting for your wash load and the type of fabric being washed.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Measure detergent and pour it into the washer. If desired, add powdered or liquid color safe bleach. Add extra detergent for the Super Wash cycle (on some models).

Drop a sorted load of clothes loosely into your washer.

■Load evenly to maintain washer balance. Mix large and small items.

■Items should move easily through the wash water. Overloading can cause poor cleaning.

■To reduce wrinkling of permanent press clothes and some synthetic knits, use a higher water level to provide more space (see step 4).

■Choose a water level that allows the load to move freely for best fabric care. See "Loading".

■You may change the water level after the washer has started filling by turning the selector to a different setting.

5.Set the TEMPERATURE selector (on some models) to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions.

NOTE: On models with temperature selections in the Cycle Control knob, see "Cycle Time and Temperature Options" in the "Selecting A Cycle and Time" section.

Water Temp

Use For

 

 

Hot

Whites and pastels

111°F (44°C)

Heavy and greasy soils

or above

 

 

 

Warm

Bright colors

90°-110°F

Moderate to light soils

(32°-43°C)

 

 

 

Cold

Colors that bleed or fade

70°-90°F

Light soils

(21°-32°C)

 

NOTE: In wash water temperatures colder than 70ºF (21ºC), detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TWO Speed Automatic Washers Use & Care GuideTable of Contents Washer Safety Your safety and the safety of others are very importantParts and Features Additional feature your washer may haveControl panel Loading Washer USEUnderstanding Washer Cycles Normal Washer SoundsWarm Starting Your WasherWater Temp Use For Hot ColdSelecting a Cycle and Time Rinse and SpinWasher Care Troubleshooting Residue or lint on load Washer basket is crooked Load is tangled or twistedLoad too wet Stains on loadFor assistance or service Assistance or ServiceIf you need replacement parts Gearcase assembly covered by your warrantyCrosley Washer Warranty Whirlpool Corporation will not pay for3953964

3953964 specifications

The Whirlpool 3953964 is a highly sought-after appliance part designed primarily for refrigerators, gaining popularity due to its efficiency and reliability. This specific part acts as a replacement for worn-out or malfunctioning components, ensuring that your refrigerator operates at optimal levels.

One of the main features of the Whirlpool 3953964 is its durability. Constructed from high-quality materials, it is engineered to withstand the rigors of daily use. This longevity helps reduce the need for frequent replacements, making it a cost-effective choice for consumers. The part is also designed to meet strict quality standards set by Whirlpool, ensuring that it will perform effectively and integrate seamlessly with a variety of refrigerator models.

In terms of technology, the Whirlpool 3953964 features advanced compatibility with different freezer and refrigerator configurations. It is designed to work efficiently within both modern and older Whirlpool refrigerator models. This adaptability allows homeowners to replace parts without needing to upgrade their entire appliance, providing flexibility and convenience.

Another important characteristic of the Whirlpool 3953964 is its ease of installation. The part is designed for straightforward replacement, often requiring no more than basic tools and minimal mechanical skills. Many users appreciate the user-friendly installation process, as it allows them to take on home repairs without the expense of hiring professional technicians.

Additionally, the Whirlpool 3953964 is an energy-efficient component that aids in maintaining optimal cooling temperatures and preserving food freshness. By efficiently regulating temperatures, it contributes to lower energy costs and a reduced carbon footprint, aligning with the growing trend of eco-friendly appliances.

Overall, the Whirlpool 3953964 stands out as an essential part for those looking to maintain the performance of their refrigerators. With durability, advanced compatibility, easy installation, and energy efficiency, it represents a smart investment for any homeowner looking to ensure their appliance runs smoothly and efficiently. Whether facing a malfunction or looking to upgrade, the Whirlpool 3953964 is a reliable choice for enhancing refrigerator performance.
Top Page Image Contents