Samsung Silver Care Washer Make sure temperature selection is correct, Recovery rate, Facility

Page 21

 

 

Troubleshooting

 

 

 

fills with the wrong

•

Turn both faucets on fully.

temperature water.

•

Make sure temperature selection is correct.

 

• Make sure hoses are connected to correct faucets. Flush water lines.

 

• Check the water heater. It should be set to deliver a minimum 120°

 

 

F (49° C) hot water at the tap. Also check water heater capacity and

 

 

recovery rate.

 

• Disconnect hoses and clean screens. Hose filter screens may be

 

 

plugged.

 

• As your Washer is filling, the water temperature may change as

 

 

the automatic temperature control feature checks incoming water

 

 

temperature. This is normal.

 

• While your Washer is filling, you may notice just hot and/or just

 

 

cold water going through the dispenser when cold or warm wash

 

 

temperatures are selected. This is a normal function of the automatic

 

 

temperature control feature as your Washer determines the

 

 

temperature of the water.

won’t tumble.

•

Check fuse or reset circuit breaker.

 

• Close the door and press the Cycle Selector dial. For your safety, your

 

 

Washer will not tumble or spin unless the door is closed.

door locked shut or

•

Press the Cycle Selector dial to stop your Washer.

will not open.

•

Your Washer door will remain locked during the heating portion of the

 

 

Sanitize Cycle

 

• It may take a few moments for the door lock mechanism to disengage.

does not drain and/or

•

Check fuse or reset circuit breaker.

spin.

•

Straighten drain hoses. Eliminate kinked hoses. If there is a drain

 

 

restriction, call for service.

 

• Close the door and press the Cycle Selector dial. For your safety, your

 

 

Washer will not tumble or spin unless the door is closed.

load is too wet at the

•

Use the High or Extra High spin speed.

end of the cycle.

•

Use high efficiency detergent to reduce over–sudsing.

 

• Load is too small. Very small loads (one or two items) may become

 

 

unbalanced and not spin out completely.

leaks water.

•

Make sure door is firmly closed.

 

• Make sure hose connections are tight.

 

• Make sure end of drain hose is correctly inserted and secured to drain

 

 

facility.

 

•

Avoid overloading.

 

• Use high efficiency detergent to prevent over–sudsing.

has excessive suds.

•

Use high efficiency detergent to prevent over-sudsing.

•Reduce detergent amount for soft water, small or lightly soiled loads.

•Non-HE detergent is NOT recommended.

Exposure to silver may result in skin irritation and/or allergic reaction in some people. If skin irritation or dermal allergies develop, discontinue the use of the washing machine using the silver ion cycle, wearing clothing washed using the silver ion cycle, and seek medical attention.

SAMSUNG Clothes Washer Owner’s Instructions E-2

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Register your product at Code No. DC68-02346B-EN Samsung SilverCareImportant Safety SYMBOLS, WORDS, Labels Safety PrecautionsDo not sit on top of your Washer Table of Contents Unpacking Your Washer Installing Your WasherOverview of Your Washer Samsung Clothes Washer Owner’s Instructions A-1Basic Location Requirements GroundingWater Minimum Clearances for Closet and Alcove Installations Alcove or Closet InstallationDrain Facility FlooringInstalling your Washer Important to InstallerStep Removing the Shipping BoltsInstalling Your Washer Loading Your Washer Operating InstructionsGetting Started Overview of the Control Panel Washing a Load of LaundrySignal selection button Temperature selection buttonDigital graphic display Spin selection buttonSelect Cycle Option Power buttonCycle Selector Start/Pause selection buttonGarment + Child LockMY Cycle ACTIVATING/DEACTIVATINGFor Silvercare Washing Detergent USE FeaturesAutomatic Dispenser Detergent CompartmentBleach Compartment PRE Wash Compartment Select ModelsFabric Softener Compartment Liquid chlorine bleach onlyCleaning the Interior Cleaning the ExteriorCleaning the Dispensers Maintaining Your WasherCheck These Points if Your Washer TroubleshootingRecovery rate Make sure temperature selection is correctTemperature. This is normal Temperature control feature as your Washer determinesInformation Codes Call for service Problem with control Call for service. See belowTemperature sensor problem Restart the cycle Vibration sensor problem Restart the cycleAppendix Fabric Care ChartProtecting the Environment SpecificationDeclaration of Conformity This appliance complies with UL2157Cycle Chart 326LAS Samsung Clothes Washer Owner’s Instructions F-4 306LAW, 306BAW316LAW, 316LAS, 316BAW, 316HAC Samsung Clothes Washer Owner’s Instructions F-6 To obtain warranty service, please contact Samsung at Samsung Clothes Washer Owner’s Instructions F-8 Memo

Silver Care Washer specifications

The Samsung Silver Care Washer is a groundbreaking laundry appliance designed to enhance convenience, efficiency, and hygiene in the washing process. Featuring an innovative combination of advanced technologies and intuitive design, it offers users numerous benefits that make laundry day less of a chore.

One of the standout features of the Samsung Silver Care Washer is its unique silver ion technology. This technology effectively utilizes the antimicrobial properties of silver to eliminate up to 99.9% of bacteria and germs during the wash cycle. This is particularly beneficial for households with young children or individuals with allergies and sensitivities, ensuring that clothing, bedding, and towels come out not just clean but also hygienic.

Another significant feature is the EcoBubble technology, which allows users to wash clothes in cold water while still achieving optimal cleaning results. By generating bubbles that penetrate fabric effectively, this technology reduces energy consumption and helps preserve the colors and textures of garments. This environmental aspect aligns with the growing trend towards sustainable living, making the Samsung Silver Care Washer a responsible choice for eco-conscious consumers.

The washer also comes equipped with a large capacity drum, accommodating heavy loads and bulky items, such as blankets and comforters. This design ensures that families can complete laundry tasks more efficiently without needing to do multiple loads. The diamond drum pattern further protects fabrics by minimizing snags and fraying, extending the life of garments.

Additionally, the washer features a self-cleaning cycle that eliminates dirt and detergent residues in the drum, enhancing hygiene and reducing the need for manual cleaning. Smart functions such as Wi-Fi connectivity allow remote control and monitoring through a dedicated app, making it easier than ever to manage laundry from anywhere.

Operating with a quiet but powerful motor, the Samsung Silver Care Washer is designed for minimal noise disruption, ensuring peaceful laundry processes. The combination of intuitive controls, various wash cycles, and energy-efficient operations makes it not only user-friendly but also a wise investment for modern households seeking a reliable and effective laundry solution.

In conclusion, the Samsung Silver Care Washer combines advanced technologies, capacity, and eco-friendly features, providing a comprehensive laundry solution that focuses on performance, hygiene, and user convenience. It stands as a testament to Samsung's commitment to innovative home appliances, making life easier for users while promoting a cleaner and healthier home environment.
Top Page Image Contents