Operating Instructions
GETTING STARTED
1.Load your Washer.
2.Close the door.
3.Add detergent and additives to the dispenser (see pages C6~C7).
4.Select the appropriate cycle and options for the load (see pages C2~C5).
5.Press the Cycle Selector dial.
6.The Wash Indicator light will illuminate.
7.The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the wash time remaining in the cycle.
8.Before your Washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.
NOTES:
•When the cycle is complete, the Door Lock light will go out and“End” will appear in the display.
•DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see “Loading your Washer” section.
•When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle continues.
•Pressing Power cancels the cycle and stops your Washer.
•The Pre Wash (select models), Wash, Rinse and Spin indicator lights will illuminate during those portions of the cycle.
SAMSUNG Clothes Washer Owner’s Instructions