
Troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Washer.
Code Symbol | Meaning | Solution |
|
|
|
| Unbalanced load prevented your | Redistribute the load, press the Cycle Selector |
| Washer from spinning. | dial. |
|
|
|
| Door is unlocked when Washer | Press the Power button to turn off your Washer, |
| is running. | then restart the cycle. If the code reappears, |
|
| call for service. See below. |
|
|
|
| Door is open when Washer is | Close the door tightly and restart the cycle. |
| running. | If the code reappears, call for service. |
|
| See below. |
|
|
|
| Your Washer failed to lock the | Close the door tightly and restart the cycle. |
| door. | If the code reappears, call for service. |
|
| See below. |
|
|
|
| Water temperature control | Call for service. See below. |
| problem. |
|
| (Heater Control problem) |
|
|
|
|
| Your Washer has tried to fill but | Call for service. See below. |
| has not reached the proper water |
|
| level. |
|
|
|
|
| The door will not unlock. | Make sure the door is firmly closed. |
|
| Push the Power button to turn off your Washer, |
|
| then turn it on again. If the code reappears, call |
|
| for service. See below. |
|
|
|
| Motor not running properly. | Restart the cycle pressing the Cycle Selector |
|
| dial. If the code reappears, call for service. |
|
| See below. |
|
|
|
| Your washer is not draining. | Before calling for service, check the following. |
| But, it can light up when the unit | 1) Turn off the unit and turn it on again. |
| senses a brief restriction while | 2) Select the Spin Only |
| draining. | 3) Press the Start/Pause to drain the water. |
|
| If it still does not drain, call for service. |
|
|
|
| Your Washer has tried to fill but | Make sure the water faucets are open all the |
| was unsuccessful. | way. Check for kinked hoses. |
|
| Check inlet screens on fill hoses. |
|
|
|