INSTALLATION INSTRUCTIONS
CONNECTING THE DRAIN HOSE
•The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage.
•Do not install the end of the drain hose higher than 96 in. (243.8 cm) above the bottom of the washer.
•The drain must be installed in accordance with any applicable local codes and regulations.
•Make sure that the drain hose is not stretched, pinched, crushed, or kinked.
Option 2: Laundry Drum
Utility Sink
Elbow
Bracket
NOTE:
A drain hose extension kit is available if the drain hose is not long enough. Do not extend the drain hose more than 6 feet, as this will cause poor draining, which will result in poor wash and spin performance.
Drain Hose Extension
P/N 5215ER2002K
Tie Strap
Drain Hose
The elbow bracket should be installed near the end of the drain hose. Hang the end of the drain hose over the
Option 1: Standpipe
Elbow Bracket
Tie Strap
Drain Hose
Install the end of the drain hose into the elbow bracket. Do not extend the drain hose more than 4 inches past the end of the elbow bracket. Use a tie strap to secure the drain hose in place.
NOTE:
•Total height of the hose end should not exceed 96 in. (243.8 cm) from the bottom of the washer.
•The drain hose should be inserted no more than
side of the utility sink. Use a tie strap to secure the drain hose in place.
Option 3: Floor Drain
Drain Hose
Floor Drain
Insert the end of the drain hose into the floor drain.
If possible, secure the hose to prevent it from moving or coming out of the drain.
CONNECT TO THE POWER SUPPLY
Washer should be plugged into a
Plug in the washer.
10