Samsung DV520AE-02836A-01 user manual Connecting the Inlet Hose, Method1, Method2

Page 17

CONNECTING THE INLET HOSE

Method1

The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.

01

1.If space permits, attach the brass female end of the “Y” connector to the cold water faucet.

2.Turn the cold water faucet off.

3.Attach the straight end of long hose to “Y’ connector.

4.Using pliers, tighten the coupling with an additional two- thirds turn.

Do not overtighten, as it may damage the coupling.

Y-Connector

Duct Ehuast

installing your dryer

5.Attach angled end of long hoses to fill the valve at the bottom of the dryer’s rear frame. Screw on coupling by hand until it is seated on fill valve connector.

6.Using pliers, tighten the coupling with an additional two- thirds turn.

Do not overtighten, as it may damage the coupling.

7.Check that the water faucets are on.

8.Check for leaks around “Y” connector, faucets and hoses.

Duct Ehuast

Frame (back)

Water Hose

Method2

The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.

1.If “Y” connector cannot be attached directly to the cold water faucet, the short hose must be used.

2.Turn the cold water faucet off.

3.Attach short inlet hose to cold water faucet.

Screw on coupling by hand until it is seated on the faucet.

4.Using pliers, tighten the coupling with an additional two- thirds turn.

Short hose

(Inlet to cold

water)

“Y’ connector

Do not overtighten, as it may damage the coupling.

5.Attach ‘Y” connector to brass male end of small hose. Screw on coupling by hand until it is seated on connector.

6.Using pliers, tighten the coupling with an additional two- thirds turn.

Do not overtighten, as it may damage the coupling.

Long hose

Duct Ehuast

Frame (back)

7.Attach angled end of long hoses to the fill valve at the bottom of the dryer rear frame. Screw on coupling by hand until it is seated on fill valve connector.

8.Using pliers, tighten the coupling with an additional two- thirds turn.

Do not overtighten, as it may damage the coupling.

9.Check that the water faucets are on.

10.Check for leaks around “Y” connector, faucets and hoses.

Water Hose

installing your dryer _17

DV520AE-02836A-01_EN.indd 17

2010-08-24 ¿ÀÈÄ 3:29:33

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Gas and Electric Dryer Features Way Vent electric model only DV520AE Pedestal with Storage DrawersStacking Model no SK-5A/XAA Important Safety Symbols and Precautions Safety instructionsWhat YOU Need to Know about Safety Instructions Safety instructions Safety instructions Contents Contents Unpacking Your Dryer Installing your dryerSee Exhaust Requirements Top Cover Back Control panel DoorTools needed Basic RequirmentsDucting Requirements Recommended Use only for short-run installationElectric and GAS Dryer Weather Hood TypeLocation Considerations Important to InstallerAlcove or Closet Installation Exhausting Mobile Home InstallationUnited States CanadaUse only natural or LP liquid propane gases Commonwealth of Massachusetts Installation InstructionsGAS Requirements Grounding Electrical RequirementsGas models Electric modelsGas models U.S. and Canada Electrical ConnectionsElectric models U.S. only Electric models Canada OnlyMethod2 Connecting the Inlet HoseMethod1 Electrical, and exhaust connections Replacement Parts and AccessoriesInstallation Models Wire system connections GAS Models ONLY- DV448AG*, DV438AG Final Installation ChecklistDryer Exhaust Tips Inspect and clean the exhaust system annuallyDon’t let a poor exhaust system slow drying by Dryer Never use lint-trapping screwsOn inside holes Remaining holes Installing your dryer Unplug the power cordDoor Reversal Door hinge To the dryer Remove two screws fromOperating Instructions, tips Drying temperatureOverview of the Control Panel Cycle SelectorDelay Start Signal SelectionDigital Graphic DisplayChild Lock Setting/ReleasingHow to Set Drum Light Setting & releasingChanging Language MY CycleRack DRY Installing the drying rackSuggested Items Suggested TEMP. Settings Getting Started Clean the Lint FilterLoad the Dryer Properly Care and cleaning Things to Avoid Special laundry tipsSpecial laundry tips Problem Solution TroubleshootingBefore using the dryer Check These Points if Your DRYER…Troubleshooting Information Codes Error Display Solution DisplayWash Cycle Special Instructions Laundering Fabric Care ChartAppendix Declaration of Conformity SpecificationsProtecting the Environment Elec. Dryer Type Cycle ChartGas Dryer Type Samsung Dryer Limited Warranty to Original Purchaser WarrantyWarranty Memo Questions or COMMENTS? Secadora a gas y eléctrica Características Apilamiento Modelo N. SK-5A/XAA Base con cajones de almacenamientoLo que necesita saber sobre las instrucciones de seguridad Instrucciones de seguridadSímbolos y precauciones de seguridad importantes Graves o la muerteGuarde estas instrucciones Advertencia Riesgo de incendio DV520AE-02836A-01MES.indd 2010-08-24 Declaración de conformidad ContenidoEspecificaciones Tabla de ciclosDesembalaje de la lavadora Instalación de la secadoraConsulte la sección Requisitos para el drenaje Cubierta superior Panel de controlHerramientas y piezas Requisitos básicos10,16 cm 6,35 cm Requisitos para el tendido de conductosSecadora Eléctrica Y a GAS Consideraciones acerca de la ubicación Importante para el instaladorDrenaje Instalación en casas rodantesEn los Estados Unidos En CanadáRequisitos en cuanto al gas Conexión a tierra Requisitos eléctricosModelos a gas Modelos eléctricosModelos a gas EE.UU. y Canadá Conexiones eléctricasModelos eléctricos Sólo EE.UU Modelos eléctricos Sólo CanadáEn el conector Conexión de la manguera de entradaMétodo Acceso a las conexiones de gas, eléctricas y de drenaje Reemplazo de las piezas y los accesoriosInstalación Modelos Estadounidenses Afloje o retire el tornillo central del bloque de terminales Conexiones de sistemas de 3 CablesConexiones de sistemas de 4 Cables Lista de verificación final de la instalaciónNunca use tornillos que atrapen pelusa Sugerencias acerca del drenaje de la secadoraUtilice un conducto de metal rígido, de 4 de diámetro Inversión de la puerta Selector de ciclos Descripción general del panel de controlDigital Pantalla gráficaBotón de Selección DryBotón de Delay Selección SignalSeñal Start InicioConfiguración y liberación Configuración/LiberaciónCómo configurarla Seguro para niñosMy Cycle Mi ciclo Cambiar de idiomaInstalación del estante de secado Rack Dry Secado en estantePuerta Prendas Sugeridas Opciones DE TEMP. SugeridasCómo comenzar Limpie el filtro para pelusasCargue la secadora de manera adecuada Cuidado y limpieza Sugerencias para prendas especiales Sugerencias para prendas especialesPara lograr un mejor funcionamiento de la secadora De la etiquetaControle estos puntos si su secadora… Problema SoluciónGuía de solución de problemas Códigos de información Pantalla DE Error Pantalla DE SoluciónPlancha ApéndiceTabla de indicaciones del tejido Especificaciones Protección del medio ambienteDeclaración de conformidad Ciclo Tabla de ciclosRopa de Samsung GarantíaGarantía ¿TIENE Preguntas O COMENTARIOS?

DV520AE-02836A-01 specifications

The Samsung DV520AE-02836A-01 is an exceptional electric dryer that combines cutting-edge technology with user-friendly features to provide superior laundry performance. Designed for modern households, this model excels in efficiency, convenience, and style, making it a worthwhile addition to any laundry room.

One of the standout features of the DV520AE model is its advanced moisture sensing technology. This system boasts built-in sensors that detect moisture levels in your clothes, automatically adjusting drying times to ensure optimal drying without risking over-drying. This not only helps to protect your fabrics but also leads to energy savings, as the dryer utilizes only the necessary time to achieve the desired dryness.

Equipped with a large capacity drum, the DV520AE can handle larger loads, making it especially efficient for families or those with heavy laundry demands. This spacious drum not only accommodates sizable loads but also allows for better air circulation, resulting in more even drying and less wrinkling. Additionally, its sleek design and elegant finish make it an attractive addition to any laundry space.

The Samsung DV520AE features a variety of drying cycles tailored to suit different fabric types and laundry needs. These include specialized cycles for delicates, heavy items, and mixed fabrics, ensuring each load receives the care it requires. Furthermore, the dryer includes a steam function that helps reduce wrinkles and eliminate odors, giving clothes a fresh, pressed appearance without the need for ironing.

Another notable characteristic of this model is the Eco Dry technology, which utilizes innovative methods to reduce energy consumption while maintaining high drying performance. This is aligned with Samsung's commitment to sustainability and energy efficiency, helping consumers save on utility bills while being environmentally conscious.

The DV520AE also incorporates a smart control system, allowing users to start, stop, and monitor their drying cycles remotely via a smartphone app. This feature enhances convenience, enabling users to manage their laundry with ease even when they are on the go.

In summary, the Samsung DV520AE-02836A-01 dryer is a versatile and technologically advanced appliance that meets the demands of today’s busy lifestyles. With its moisture sensing technology, large capacity drum, diverse drying cycles, steam function, Eco Dry system, and smart control capabilities, it stands out as an excellent option for anyone looking to enhance their laundry experience.
Top Page Image Contents