INSTALLATION REQUIREMENTS
Tools and Parts
Gather required tools and parts before starting installation.
Tools needed:
|
|
|
Adjustable or open end |
| Level |
wrench 9/16" (14 mm) |
|
|
4" min
(102 mm)
Parts needed: (Not supplied with washer)
Inlet hoses with flat washers
To order, please refer to
n 8212656RP | 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack) |
n 8212641RP | 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack) |
n 8212646RP | 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack) |
n 8212545RP | 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM |
| (2 pack) |
n 8212487RP | 5 ft. (1.5 m) Nylon braided inlet hose (2 pack) |
n 8212638RP | 6 ft. (1.8 m) Nylon braided inlet hose, space |
| saving 90° elbow, |
Wood block
Pliers that open to 19⁄16" (39.5 mm)
Optional tools:
Flashlight
Ruler or measuring tape
Bucket
(2 pack) |
n 8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space |
saving 90° elbow, |
(2 pack) |
Alternate parts: (Not supplied with washer)
Your installation may require additional parts. To order, please refer to
If you have: | You will need: |
Overhead sewer | Standard 20 gal. (76 L) 39" (990 mm) |
| tall drain tub or utility sink, sump |
| pump and connectors (available from |
| local plumbing suppliers) |
1" (25 mm) standpipe | 2" (51 mm) diameter to 1" (25 mm) |
| diameter Standpipe Adapter |
| Part Number 3363920 |
| Connector Kit Part Number 285835 |
Drain hose too short | Extension Drain Hose Part |
| Number 285863 |
Parts supplied:
NOTE: All parts supplied for installation are in cardboard insert in the top of the washer.
|
|
|
Beaded tie strap |
| Drain hose with clamp |
| Connector Kit Part Number 285835 |
Lint clogged drain | Drain Protector Part Number 367031 |
| Connector Kit Part Number 285835 |
LOCATION REQUIREMENTS
Select proper location for your washer to improve performance and minimize noise and possible “washer walk”. Install your washer in a basement, laundry room, closet, or recessed area.
271/2" | 27" |
(648 mm) | (686 mm) |
42"
(1067 mm)
2