CONTROL PANEL
The control panel is simple to understand and easy to operate.
Option | On/Off | Temperature | Program | |
Buttons | ||||
Button | Control Knob | Control Knob | ||
|
ENGLISH
WARM | EXTRA | NO | HALF | ON |
RINSE | RINSE | SPIN | LOAD | OFF |
DELICATE
SOAK
REGULAR
WARM
COLD
S
E
S
IN
R
WOOL /
HANDWASH
SPIN
HOT
R
I
N
S
E
S
NORMAL
HEAVY STAIN
PERMA PRESS
HEAVY STAIN
NORMAL
QUICK
WASH
|
|
| S |
|
|
| E |
| I | N | S |
R |
| ||
|
|
|
SPIN
Power Indicator Light
PROGRAM CONTROL KNOB
Each wash program is specifically designed to give you the cleanest laundry possible. The table on page 10 defines each program in detail, so you can determine which program is best for each type of load.
TEMPERATURE CONTROL KNOB
The Temperature Control Knob lets you select the best wash temperature for each load. The temperature options are restricted on some of the programs (as shown in the table on page 10). For example, the Wool/ Hand Wash program is restricted to cold or warm. This is to prevent accidentally washing delicate items in hot water.
OPTION BUTTONS
These buttons give you even more wash options. Be sure to press the option buttons before you set the Program knob to a wash program. Each option is explained in detail below.
Warm Rinse
If you select this option, the last rinse is with warm water. This function is not available with the Wool/Hand Wash program.
Extra Rinse
The washing machine has been set up so that water consumption is reduced to a minimum. Two or three rinses are usually sufficient. If desired, select this button for one additional rinse. This option is not available with the Quick Wash program.
No Spin
This option omits all of the spin cycles. Recommended for delicate fabrics that should not be spun.
Half Load
This option is designed to save water when you are only washing a small, slightly soiled load. This option is not available with the Wool/Hand Wash program.
ON/OFF BUTTON
This button merely switches the power to the machine off and on.
POWER INDICATOR LIGHT
This light glows when the power to the machine is on.
CANCELLING A PROGRAM
To cancel a program after it has started, simply turn the Program knob to any one of the dots around the dial.
9