Cissell HF455, HF575 manual Water drain, Electrical Connection, Machine without electrical heating

		3
Water drain	The machine is equipped with a drain valve with 3" outer diameter (80 mm).
	This drain valve should be connected to the drain by means of the drain
	elbow which is delivered with the machine.
	pThe diameter of the main drain should be adapted to the water flow and
	the number of machines. It should be sufficient to handle at least 160L/
	min. per machine.
	pIt is necessary to connect the main drain at least on one side to an open
	air-brake to allow ventilation.
	pWhen the main drain has not been sufficiently deodorized, every
	machine should be installed seperately with a deodorizer.
Electrical Connection	pRemove the cover plate at the back of the machine (see dimensions).
	pConnect the power cable to the connectors R,S,T (3 x 220V) or R,S,T and
	N (3 x 380V + N) and the ground wire.
	Machine without electrical heating
	Power of the breaker plugs:
	220V3AC	380V 3AC + N
	20 A	20 A

Machine with electrical heating

Power of the breaker plugs:
	220V3AC 380V 3AC + N
27 kW	80 A	63 A
36 kW	----	80 A

After having connected the machine, check the spin direction of the drum. The drum should spin in the direction of the arrow indicated on the door glass (clockwise). If the drum spins in the wrong sense, it can cause damage to the motor and can cause water to splash out through the soap dispenser.

In case of a wrong spin direction, switch the position of the connectors of the motor circuit from R to S and vice versa.

8