| 6 |
Maintenance of the machine | |
General maintenance | p Clean the entire cabinet of the machine regularly and remove all traces of soap, |
etc....
p Remove all detergent residue in the soap dispenser with hot water. p Clean the door gasket and remove all detergents and other products.
p Shut off the main water, steam and power connections at the end of each day. Do not change the setting of the water inlet taps on boiler fed machines once these have been installed.
p It is recommended to leave the door and the soap dispenser open after use, to ventilate the machine.
Periodical maintenance p The
pCheck regularly if the filters of the water inlet are not blocked by calcification.
pIf a machine frequently skips the final spin, check whether the probe of the out of balance switch is still in the appropriate position, that is horizontally centered and vertically 1/3 from the bottom inside the window. (When the drum is empty).
pAn obstructed drain can cause frequent interruption of spinning for safety reasons.
pThe automatic lubricator needs to be replaced each year. (Order number: 212/ 00002/00)
Repair and | p In case of important malfunctions and deficiencies which you cannot resolve | ||||
service | yourself, do not hesitate to contact the technical service of your distributor. | ||||
|
|
|
| ||
|
| Data distributor: |
| Name: | |
|
|
|
|
| Address: |
|
|
|
|
| |
|
|
|
|
| Tel.: |
|
|
|
|
| |
|
| Data machine: | Type: | ||
|
|
|
|
| Program: |
|
|
|
|
|
Date of installation: .............................................................
Installed by: ........................................................................
Serial number: ....................................................................
Operation voltage and frequency: .........................................
The manufacturer reserves the right to change the content of this instruc- tion manual, at all times and without previous notice.
15