CASSETTE PLAYBACK
Operate in the order shown
ÖWhen AC power is used
(When battery power is used, switch on the 
button first, then perform operation):
|
| 1 |
|
ON/STANDBY |
|
|
|
AHB PRO | ACS | SOUND |
|
PRESET | ONE TOUCH |
| |
AUX | TUNING | REC |
|
BEAT CUT | STANDBY AHB PRO | ACS | |
|
| ||
|
| OPEN |
|
| 2 | 3 | 1 |
|
|
| OPEN |
|
| VOLUME |
|
|
| BAND |
|
C D | TAPE | TUNER |
|
MULTI CONTROL | Turn the OPEN knob to the | ||
|
|
| |
REW | STOP | FF | left to open the cassette |
|
|
| |
holder.
Close the cassette holder.
1Load a cassette tape with side A facing out.
2Press to start playback. (The power is switched on and the TAPE mode is engaged to start tape playback.)
3Adjust the volume.
ÖAfter loading a cassette tape, simply press the TAPE 23 button. The power is switched on and the tape starts playback. (To select the playback direction, press the TAPE 23button. The change in direction can be checked with the tape direction indicator (2 or 3).)
ÖWhen the tape plays back with the reverse mode set to 
(single side
play) or 
(both sides play) mode, the tape stops automatically at the end of the tape after playing one or both sides. When the reverse mode
is set to the 
(continuous play) mode, the tape continuously plays one side after the other until you stop operation.
Notes:
ÖPlace the unit on a level surface, otherwise the cassette holder may not open when you turn the OPEN knob.
ÖDo not turn the OPEN knob until the tape mechanism has stopped moving.
ÖWhen no tape is loaded in the deck, its tape playback direction cannot be switched over.
How to fast-wind tapes
1.Press the TAPE 23 button (to set to TAPE mode).
2.Press the 4 (REW) or ¢ (FF) button.
USING WITH ANOTHER AUDIO UNIT
Operate in the order shown
ÖWhen AC power is used
(When battery power is used, switch on the 
button first, then perform operation):
2
ON/STANDBY
AHB PRO | ACS | SOUND |
PRESET | ONE TOUCH | |
AUX | TUNING | REC |
STANDBY AHB PRO ACS
BEAT CUT
OPEN
4 2
AUX
VOLUME
BAND
C D TAPE TUNER
MULTI CONTROL
REW STOP FF
1Connect the audio unit, turntable, MD player, etc. to the AUX IN jack (see page 6).
2Press the AUX button. (The power is switched on and the AUX mode is engaged.)
3Start playback on the connected audio unit.
(For more details, refer to the instruction manual of the connected audio unit.)
4Adjust the volume.
(The volume level is displayed in the display window.)
17