Beko WMP652W manual

Page 31

Loading door cannot be opened.

•Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme.

•Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.

•Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. >>> Wait for a couple of minutes for deactivation of the door lock.

Washing takes longer time than the one specified in the manual.

•Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

•Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.

•Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

•Number of rinses and/or amount of rinse water might have increased. >>>

Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

•Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water.

Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown.

•There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

31

EN

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Automatic washing machine Explanation of symbols Table of Contents Overview Your washing machineTechnical specifications Intended use Important safety instructionsGeneral safety Childrens safetyPage Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcementConnecting water supply Adjusting the feet Connecting to the drainElectrical connection Fitting a different plug Electrical requirementsDisposing of the old product First useDisposing of packaging material Transportation of the productPreparing laundry for washing PreparationThings to be done for energy saving Sorting the laundryLoading the laundry Correct load capacityUsing detergent and softener If the product does not contain a liquid detergent cup Using gel and tablet detergentUsing starch Using bleachesUsing limescale remover Soiling Level Clothes Tips for efficient washingProgramme selection Operating the productControl panel Preparing the machineAdditional programmes Main programmesRinse Temperature selectionSpecial programmes Spin speed selectionProgramme and consumption table Auxiliary function selection Child Lock Changing the Delayed Start periodCancelling the Delayed Start function Starting the programmeChanging the selections after programme has started Cancelling the programmeProgress of programme Loading door lockEnd of programme Cleaning the body and control panel Maintenance and cleaningCleaning the detergent drawer Cleaning the loading door and the drumDraining remaining water and cleaning the pump filter Page Tap is turned off. Open the inlet water taps fully TroubleshootingPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Foam is overflowing from the detergent drawer Guarantee Republic of Ireland ServiceService once the manufacturers guarantee has expired UK Mainland & Northern IrelandPage

WMP652W specifications

The Beko WMP652W is a modern washing machine that combines efficiency, convenience, and reliability, making it an excellent choice for households of all sizes. With a sleek white finish, this model is designed not only to perform well but also to fit seamlessly into your laundry space.

One of the standout features of the Beko WMP652W is its energy efficiency. Boasting an A++ energy rating, this washing machine ensures lower energy consumption compared to many others on the market. This not only helps reduce your utility bills but also makes it an environmentally friendly option. The machine's capacity of 6.5 kg is perfect for small to medium-sized families, allowing for efficient washing of everyday laundry without the need for multiple cycles.

The WMP652W is equipped with a variety of washing programs tailored to suit different fabric types and levels of soil. With 15 different wash cycles, users can choose the most appropriate setting for their laundry needs, ensuring optimal cleaning and care for garments. Among these programs, a quick wash option is available, which can wash lightly soiled clothes in just 28 minutes, perfect for those in a rush.

This model is also designed with user convenience in mind. The electronic control display makes it easy to select programs and monitor the wash cycle. The delay start feature allows users to set the machine to start up to 9 hours later, providing flexibility in managing laundry schedules around daily activities.

In terms of technology, Beko has incorporated its AquaWave technology into the WMP652W. This feature ensures a gentler wash action that mimics the motion of waves, ensuring that even your most delicate fabrics are cleaned effectively without damage. Additionally, the machine comes with a child lock function, ensuring safety for families with young children.

Another advantage of the Beko WMP652W is its quiet operation. The machine uses a brushless motor, which reduces noise levels during washing and spinning, making it suitable for open-plan living spaces or during nighttime use.

Overall, the Beko WMP652W is a well-rounded washing machine that offers a blend of functionality, efficiency, and thoughtful design. Its range of features makes it adaptable to various laundry requirements while maintaining a user-friendly experience. Whether you’re dealing with everyday clothes or special delicates, this washing machine is prepared to deliver high-quality laundry results. It stands as a reliable appliance for anyone looking to streamline their laundry routine.
Top Page Image Contents