Beko WMP652W Installation, Appropriate installation location, Removing packaging reinforcement

Page 8

3Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. C Preparation of the location and

electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

BInstallation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

APrior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

C Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

Appropriate installation location

•Place the machine on a rigid floor.

Do not place it on a long pile rug or similar surfaces.

•Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

•Do not place the product on the power cable.

•Do not install the product at places where temperature may fall below 0ºC.

•Place the product at least 1 cm away from the edges of other furniture.

Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Removing the transportation locks

ADo not remove the transportation locks before taking out the packaging reinforcement.

ARemove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged.

1.Loosen all the bolts with a spanner until they rotate freely (C).

2.Remove transportation safety bolts by turning them gently.

8

EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Automatic washing machine Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Important safety instructions General safetyChildrens safety Intended usePage Installation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksConnecting water supply Electrical connection Connecting to the drainAdjusting the feet Electrical requirements Fitting a different plugFirst use Disposing of packaging materialTransportation of the product Disposing of the old productPreparation Things to be done for energy savingSorting the laundry Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using gel and tablet detergent Using starchUsing bleaches If the product does not contain a liquid detergent cupUsing limescale remover Tips for efficient washing Soiling Level ClothesOperating the product Control panelPreparing the machine Programme selectionMain programmes Additional programmesTemperature selection Special programmesSpin speed selection RinseProgramme and consumption table Auxiliary function selection Changing the Delayed Start period Cancelling the Delayed Start functionStarting the programme Child LockCancelling the programme Progress of programmeLoading door lock Changing the selections after programme has startedEnd of programme Maintenance and cleaning Cleaning the detergent drawerCleaning the loading door and the drum Cleaning the body and control panelDraining remaining water and cleaning the pump filter Page Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Foam is overflowing from the detergent drawer Guarantee Service Service once the manufacturers guarantee has expiredUK Mainland & Northern Ireland Republic of IrelandPage

WMP652W specifications

The Beko WMP652W is a modern washing machine that combines efficiency, convenience, and reliability, making it an excellent choice for households of all sizes. With a sleek white finish, this model is designed not only to perform well but also to fit seamlessly into your laundry space.

One of the standout features of the Beko WMP652W is its energy efficiency. Boasting an A++ energy rating, this washing machine ensures lower energy consumption compared to many others on the market. This not only helps reduce your utility bills but also makes it an environmentally friendly option. The machine's capacity of 6.5 kg is perfect for small to medium-sized families, allowing for efficient washing of everyday laundry without the need for multiple cycles.

The WMP652W is equipped with a variety of washing programs tailored to suit different fabric types and levels of soil. With 15 different wash cycles, users can choose the most appropriate setting for their laundry needs, ensuring optimal cleaning and care for garments. Among these programs, a quick wash option is available, which can wash lightly soiled clothes in just 28 minutes, perfect for those in a rush.

This model is also designed with user convenience in mind. The electronic control display makes it easy to select programs and monitor the wash cycle. The delay start feature allows users to set the machine to start up to 9 hours later, providing flexibility in managing laundry schedules around daily activities.

In terms of technology, Beko has incorporated its AquaWave technology into the WMP652W. This feature ensures a gentler wash action that mimics the motion of waves, ensuring that even your most delicate fabrics are cleaned effectively without damage. Additionally, the machine comes with a child lock function, ensuring safety for families with young children.

Another advantage of the Beko WMP652W is its quiet operation. The machine uses a brushless motor, which reduces noise levels during washing and spinning, making it suitable for open-plan living spaces or during nighttime use.

Overall, the Beko WMP652W is a well-rounded washing machine that offers a blend of functionality, efficiency, and thoughtful design. Its range of features makes it adaptable to various laundry requirements while maintaining a user-friendly experience. Whether you’re dealing with everyday clothes or special delicates, this washing machine is prepared to deliver high-quality laundry results. It stands as a reliable appliance for anyone looking to streamline their laundry routine.
Top Page Image Contents