Installation O p t i o n s, Built-In, Under Counter

I n s t a l l a t i o n O p t i o n s

Built-In

		Wide
	x3/4"
High		Sides
3/4"		All
	on
Lip
A
B
		C

Elevate the pair for easy accessibility and a custom appearance.

DIMENSION A:

14" recommended, however this laundry pair can be elevated to suit customer needs.

•All four sides of the plat- form should be perman- ently secured and extend a minimum of 3/4" above the platform.

•Height is only limited by the use of overhead cabinetry.

•The standpipe height must be increased to accommodate additional installation height.

DIMENSION B:

•The platform must be constructed to include a 3/4" high and 3/4" wide lip all the way around the top edge. The outside depth should be 29" minimum. Consideration

should be given to the location of the washer standpipe and dryer duct run.

DIMENSION C:

•The outside width should be wide enough to accommodate the laundry pair, plus a 3/4" lip on each side. Recommend 56" to 60" width.

•The platform surface must be constructed to minimum code floor requirements.

•The structure must be secured to a rear wall.

•To complete the installation follow instructions packed with the washer and dryer.

•Order Built-In Instruc- tions, Pub. No. 14-T029

•No trim kits required.

Under Counter

	Countertop
Washer	Dryer
Top Sheet	Top Sheet

Create an efficient work space for folding and storage.

•Top caps on the washer and dryer must be removed and replaced with a top sheet kit. The addition of a standard

1-1/2" thick countertop over the pair will result

in a standard 36" countertop height.

•Install the washer and dryer according to the installation instructions packed with the products.

• Install an extra deep	• Order Accessory Kits:
countertop to accom-	Washer Pub. No. 14-A037
modate the laundry pair.	Dryer Pub. No. 14-A008
Adjacent cabinets can be
moved forward to align
with the front face of the
washer and dryer.