14electrolux use
After you have pressed the «Start/Pause» button and the machine
has started, the 
(Door locked) icon is
When the programme has finished, a flashing zero (0.00) is displayed and the
(Door locked) icon desappears.
Delay
The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed. The relevant
phase icon 
is
The delay time value decreases by one unit every hour and then, when 1 hour remains, the time decreases every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
Easy Iron Extra rinse | Delay | Start/Pause |
|
End of programme
When the programme has finished a
flashing zero is displayed, the 
(Door locked) icon desappears and the door can be opened.
Easy Iron Extra rinse | Delay | Start/Pause |
Temp. | Spin | Easy Iron Extra rinse | Delay |
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for about 2 seconds and the integrated red «Start/Pause» light start flashing.
Easy Iron Extra rinse | Start/Pause |
Delay |
Heating phase
During the washing cycle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub.
Temp. | Spin | Easy Iron Extra rinse | Delay |