Electrolux EWG 14740 W user manual Mounting the door, Counter-magnet

Page 41

building-in electrolux 41

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's dimensions. The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges can be adjusted to compen- sate for possible uneven thickness of the door.

To align the door perfectly it is neces- sary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again.

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic closure of the door. To enable a correct operation of this device, it is necessary to screw the counter-magnet

(6)(steel disk + rubber ring) into the inner side of the door.

Its position must correspond to the magnet (4) on the appliance (see picture D).

 

6

 

4

P0984

D

 

If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described.

 

 

 

E

4

 

 

6

 

 

 

 

5

7

1

 

 

 

 

 

 

 

3

 

P0983

 

 

2

 

 

 

Recommendations regarding the construction and fitting of a base when the installation requires an integrated appliance to be raised.

Where the appliance has been raised by mounting onto a wooden base provided by the installer. The material used to construct the base should have a non slip surface, be water repellent and if possible be one solid piece.

If it is not possible to use one solid piece, due to the additional height required, ensure that any additional strips of timber are glued and screwed to the underside of the base (see Fig. F).

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Washing Machine EWG 14740 W Page Welcome to the world of Electrolux Contents Installation Safety InformationGeneral safety Use Child safetyDetergent dispenser drawer Product descriptionControl panel Daily Use Use First UseSelect the required programme Programme Option buttons Select the temperatureSelect the Extra Rinse option To empty out the waterDuration of the selected programme Washing programme phase iconsAlarm codes DelayHeating phase End of programmeTime manager option cannot be selected with Eco programmes Select the Start/PauseSelect the Time Manager option Altering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedIf the Rinse Hold or Night Cycle At the end of the programmeWashing hints Detergents and additives Removing stainsDegrees of water hardness Quantity of detergent to be usedInternational wash code symbols Cottons Eco+ Prewash Synthetics Normal Delicates Washing programmesCottons Normal Eco + Prewash Spin Red./No Spin/Night Cycle Rinse Hold Wool Handwash LingerieSilk Rinse Drain SpinEconomy programmes Wool Handwash Silk Rinses Drain Spin Programme informationCare and cleaning Cleaning the water drain filter Emergency emptying out Cleaning the water inlet filterMalfunction Possible cause Something not workingE20 Electrolux Something not working Columns and margins electrolux Technical data Consumption values Programme Water Energy Unpacking InstallationConnect the hose to a tap with a 3/4 thread Into a drainage standpipe Water drainageInterest of the environment Onto a sink outlet spigotSpecial conditions Live Electrical connectionPermanent connection Hinges Building-inDoor Counter-magnet Mounting the doorDrill four fixing holes see Fig. G Packaging materials Environment concernsOld machine Ecological hintsExclusions Standard guarantee conditionsService and Spare Parts Customer Care European Guarantee61 24 25 Tr aška 132, 1000 Ljubljana Slovensko Customer Service CentresPage ANC number 132 973 570
Top Page Image Contents