Electrolux EWG 14440 W user manual Mounting the door, Counter-magnet

Page 40

40 electrolux building-in

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's dimensions. The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges can be adjusted to compen- sate for possible uneven thickness of the door.

To align the door perfectly it is neces- sary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again.

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic closure of the door. To enable a correct operation of this device, it is necessary to screw the counter-magnet

(6)(steel disk + rubber ring) into the inner side of the door.

Its position must correspond to the magnet (4) on the appliance (see picture D).

 

6

 

4

P0984

D

 

If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described.

 

 

 

E

4

 

 

6

 

 

 

 

5

7

1

 

 

 

 

 

 

 

3

 

P0983

 

 

2

 

 

 

Recommendations regarding the construction and fitting of a base when the installation requires an integrated appliance to be raised.

Where the appliance has been raised by mounting onto a wooden base provided by the installer. The material used to construct the base should have a non slip surface, be water repellent and if possible be one solid piece.

If it is not possible to use one solid piece, due to the additional height required, ensure that any additional strips of timber are glued and screwed to the underside of the base (see Fig. F).

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Washing Machine EWG 14440 W Page Welcome to the world of Electrolux Contents General safety Safety InformationInstallation Child safety UseProduct description Detergent dispenser drawerControl panel Acoustic signals Child safety lockUse First Use Daily UseMeasure out the detergent and the fabric softener Select the required programmeSelect the temperature Programme Option buttonsSelect the spin speed, No spin or Rinse Hold option To empty out the waterSelect the Easy Iron option Select the Extra Rinse optionWashing programme phase icons DelayAlarm codes Duration of the selected programmeEnd of programme Heating phaseSelect the Time Manager option Select the Start/Pause Altering an option or a running programme Interrupting a programmeOpening the door after the programme has started Cancelling a programmeAt the end of the programme Washing hints Removing stains Detergents and additivesQuantity of detergent to be used Degrees of water hardnessInternational wash code symbols Washing programmes Cottons Normal Eco + Prewash 90Spin Red./No Spin/ 3 rinses WoolLingerie Silk Rinse Drain Spin Programme information Economy programmes Wool Handwash Silk Rinses Drain SpinCare and cleaning Cleaning the water drain filter Cleaning the water inlet filter Emergency emptying outSomething not working Malfunction Possible causeE20 Malfunction Electrolux Something not working Technical data Consumption values Programme Water Energy Installation UnpackingConnect the hose to a tap with a 3/4 thread Water drainage Into a drainage standpipeSpecial conditions Onto a sink outlet spigotInterest of the environment Electrical connection LiveElectrolux installation Door Building-inHinges Mounting the door Counter-magnetDrill four fixing holes see Fig. G Environment concerns Packaging materialsOld machine Ecological hintsService and Spare Parts Standard guarantee conditionsExclusions European Guarantee Customer CareCustomer Service Centres 61 24 25 Tr aška 132, 1000 Ljubljana SlovenskoElectrolux Page ANC number 132 973 260
Top Page Image Contents