Electrolux EWG 14440 W user manual Drill four fixing holes see Fig. G

building-in electrolux 41

Drill four fixing holes see Fig. G

	600-605 mm
	490 mm
	95 mm
	Front edge
	50 mm
G	Top view

Position the base into the recess with its front edge as far forward as the adjoin- ing plinth line will allow.

The reason for placing the base in this position is to allow a small strip of beading to be fitted in front of the appliance feet.

Fix the base firmly to the floor using four appropriate countersunk screws (see Fig. H).

With the appliance installed adjust all four feet ensuring the machine is stable, and a clearance of approximately 5 mm is left between the top of the machine and the underside of the worktop.

A final check for stability should be car- ried out with the machine on spin with a load, this will identify the need for any further fine adjustment to the feet.

A strip of beading approximately 605

mmW, x 5 mm H, x 25 mm D must be screwed down into the base directly in front of the machine’s feet, this will pro- vide additional security.

If required an additional door magnet, part number 1242394-00/3 and disc, part number 1242393-00/5 are avail- able from spare parts.

Hardwood strip	5 X 25 X 605
5 mm x 25 mm
	490
	600-605

H