Electrolux FWM 1010 manual Installation Instructions, Technical Specifications

Page 21

Installation Instructions

It is dangerous to alter the specifications or attempt to modify this product in any way.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

Technical Specifications

DIMENSIONS

Height

82 cm

 

Width

60 cm

 

Depth

54 cm

 

 

 

POWER SUPPLY VOLTAGE

 

230-240 V/50 Hz

TOTAL POWER ABSORBED

 

2050 W (10A)

 

 

 

WATER PRESSURE

Minimum

0.05 MPa

 

Maximum

00.80 MPa

 

 

 

MAX LOAD CAPACITY

Cotton, linen

5 kg

 

Synthetics

2 kg

 

Delicate fabrics

2 kg

 

Wool

1 kg

 

 

 

SPIN SPEED

Maximum

1000 rpm

 

 

 

CONSUMPTION DATA FOR WASHING

Energy

1.15 kWh

5 KG NORMALLY SOILED COTTON

Water

59 litres

ITEMS AT 60°C (PROGR. C)

Time

140 mins

 

 

 

This appliance complies with the following E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

21

Image 21
Contents Washing Machine Installation Child SafetyUse Contents Your New Washing Machine Ecological hintsInterest Environment Child safety feature Description of the ApplianceDetergent dispenser drawer Control Panel Operating Sequence At the end of the programme Start the machineWashing 2 KG of Mixed Fabrics AT 50C At the end of the programme 1000g = 1 kg Washing HintsWhich form? Which detergent?Important Notes Wash Care SymbolsWashing Programmes Load Wash programme Degree of soil Programme DescriptionMaintenance and Cleaning Water inlet filter Emergency emptying outSomething Not Working Service & Spare Parts 0870 5Customer Care Standard guarantee conditions Guarantee ConditionsEuropean guarantee ExclusionsTechnical Specifications Installation InstructionsInstallation on a Suspended Floor UnpackingPositioning Water drainage Water inletAppliance must be connected to a cold water supply Into a drainage standpipeSpecial conditions LevellingInterest of the environment Onto a sink outlet spigotPermanent connection Electrical connectionDoor Building-inHinges Mounting the doorDrill four fixing holes see Fig. G