Electrolux EWT 12420 W user manual Untying, Water supply

Page 23

Untying

4 3

5

2

1

1

2

3

technical specifications / installation 23

4

To install your washing machine at the same level as surrounding furniture, pro- ceed as follows :

5

Water supply

Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows (Do not reuse an old hose) :

1

 

 

2

 

 

 

 

 

 

3

 

 

4

 

 

 

 

 

 

Open the water inlet tap. Check there are no leaks.

The water inlet hose can not be exten- ded. If it is too short, please contact the after-sales service.

Image 23
Contents Washing machine EWT 12420 W We were thinking of you Welcome to the world of Electrolux Contents Installation Use Precautions to be taken against frostDispenser box Softener do not fill above the MAX symbol M Control panelDescription of the appliance Personalisation SymbolsChild safety Audible signalProportioning of detergents Daily useLoading washing Prewash option Selecting the temperatureSelecting the spin speed Selecting optionsTime Manager Delay start optionModifying the programme in pro Cancelling the programmeStart of the programme Interrupting a programme Adding washingStandby mode Detergents and additives Washing guideSorting and preparing the washing Wash loads depending on type of materialsDRY Cleaning International symbolsProgramme / Type of washing Load Possible options Programmes tableConsumption Drainage filter Care and cleaningDescaling the appliance ExteriorProblems Causes Operating problemsProblems Causes Operating problems Installation3 Technical specificationsWater supply UntyingPositioning DrainageElectrical connection Protecting the environment EnvironmentDisposing of the appliance Exclusions Guarantee/Customer ServiceStandard guarantee conditions Service and Spare PartsCustomer Care European Guarantee108 2472 01 11/07