Connection the vent hose
For EZ 1710 V, the machine vents the moist hot air out of the unit and require a vent hose to be installed, To install the vent hose,
Screw the vent hose 2 into the flange 1(Fig.5).
( Fig.5)
RECESSED, CLOSET AND ALCOVE
INSTALLATION (Instructions)
The machine may be installed in a recessed area, closet or alcove.
The installation spacing is in inches and is the minimum acceptable.
Additional spacing should be considered for easy installation, servicing and compliance with local codes and ordinances.
Closet installation must be exhausted.
Other installations must use the minimum dimension indicated.
?Additional clearances for wall, door and floor molding may be required.
?? Additional space is needed when an external exhaust elbow is used.
The closet’s front door must be a shutter, and the clearance between the slats must be more than 1/3 area the front door.
For EZ 1710 V , see Fig 6,
For EZ 3710 CEE , see Fig 7.
( Fig.6)
( Fig.7)
11 | Combo Washer- Dryer Owner’s Manual |