Installing/Removing
Getting things ready to install your appliance (continued)
CORRECT LEVELING OF UNIT IS ESSENTIAL
It is important for the machine to be perfectly level. The angle of inclination on the work surface must not be more than 2 degrees. For this reason the machine is fitted with adjustable feet used for leveling the machine before use. In the case of carpeted flooring, remember to check that the ventilation in the support area is not plugged.
Exhaust Duct Installation
•Check that all ducting is lint free. Secure ducting with clamps or metal tape.
•The exhaust duct must end with an approved exhaust vent hood with swing out dampers or appropriate louvers.
•Flex or rigid metalic ducting is recommended.
•Exhaust duct should be short and straight and slope downwards and away from the appliance. Long exhaust duct runs can increase drying time and collect lint.
IMPORTANT! THE EXHAUST DUCT SHOULD NOT BE INSERTED INTO A CHIMNEY WALL, CEILING OR CONCEALED SPACE OF STRUCTURE.
Page 4