Hotpoint AQM8F 49 U instruction manual Trouble shooting, Problem Possible causes / Solutions

Page 14

Trouble shooting

 

Your washer dryer could occasionally fail to work. Before contacting the Technical Assistance Centre (see “Assistance”),

EN

make sure that the problem cannot be not solved easily using the following list.

 

Problem:

Possible causes / Solutions:

 

The machine does not switch on.

The appliance is not plugged into the socket fully, or not enough to make contact.

There is no power to the socket, or the fuse has blown in the mains plug.

The wash cycle does not start.

The door is not closed properly.

The ON/OFF button has not been pressed.

The START/PAUSE button has not been pressed.

The water tap has not been turned on to allow water to flow into the machine.

The ‘DELAY TIMER’ has been selected.

The ‘CHILD LOCK’ is activated (see ‘The machine just ‘beeps’ when a programme or option is selected’ below).

The machine does not dry.

Check the 2 sections above.

The ‘DRY’ button has been pressed to exclude drying.

The clothes are too hot when the drying cycle is finished.

A cooling-down period is always added to the end of each drying cycle. If the clothes appear too hot to handle leave the door open to allow to cool further before removing from the machine.

The machine does not fill with water or Indicator light for the first wash cycle flashing rapidly.

The water inlet hose is kinked.

The water inlet hose is not connected to the water supply.

The water pressure is too low.

The water tap has not been turned on to allow water to flow into the machine.

There is no water supply to the house.

The inlet valve filter is blocked.

The START/PAUSE button has not been pressed.

The machine continuously fills with water and continually drains away or Water left in the drum

or Stuck on wash.

The machine does not drain or spin - (error lights flashing).

The machine does not spin.

The programme takes too long.

The Display sticks at one ‘time to end’ for more than 1 Minute or the Display changes the estimated ‘Time to End’ during the programme.

The machine vibrates a lot during the spin cycle.

The machine is noisy.

The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor (see “Installation”).

The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

The end of the drain hose has been pushed too far down the standpipe, the ‘U’ bracket should be fitted 100 mm from the end of the drain hose.

The Pump filter is blocked.

The drain hose is kinked (see “Installation”).

New Installation - The blanking cap or spigot has not been removed if connected under a sink.

The drain hose or sink trap is blocked.

The Spin Speed is set to “” position.

Programme times will vary due to water pressure, the incoming water temperature and if the wash load goes out of balance. This will increase the programme time accordingly (see ‘The machine wont spin properly’ below) - (Most Common Cause!)

The display time is for guidance only - it is not a precise time to finish and may vary.

The feet have not been adjusted, enabling the machine to rock.

New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine.

The machine is trapped between cabinets and/or walls.

The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

There will always be some motor, pump and drum noise during spin.

14

Image 14
Contents Instructions for installation and use AqualtisUnpacking and levelling InstallationConnecting the electricity and water supplies Disposing of the plug Replacing the fuseRemoving the plug Following code Disposing of the applianceTechnical data Pre-wash compartment use powder detergent Description of the machineAlways use the handle to open the porthole door see figure Control panel Temperature buttonHow to run a wash cycle or a drying cycle Selector knob90 cottons cycle without pre-wash Maximum values are restoredRunning a wash cycle Page Wash options Wash cycles and optionsTable of wash cycles Preparing the laundry Detergents and laundryDetergent Washing recommendationsDisposal Precautions and tipsGeneral safety Opening the porthole door manuallyCare and maintenance Machine is trapped between cabinets and/or walls Trouble shootingProblem Possible causes / Solutions Page ENGuarantee AssistanceAfter Sales Service Page Page 195075248.06
Related manuals
Manual 20 pages 13 Kb

AQM8F 49 U specifications

The Hotpoint AQM8F 49 U is a modern and efficient washing machine designed to meet the diverse laundry needs of households. With a range of innovative features and technologies, it offers convenience, performance, and flexibility, making it a popular choice among consumers.

One of the standout features of the AQM8F 49 U is its large capacity drum, which can accommodate up to 8 kg of laundry. This makes it suitable for larger families or those who have frequent washing needs. The 1400 RPM spin speed ensures effective water extraction, resulting in shorter drying times and energy savings.

The machine is equipped with a variety of wash programs tailored for different fabric types and soil levels. This includes specialized cycles for cotton, synthetics, wool, and delicate items, ensuring that every garment receives optimal care. Additionally, the Night Cycle program is particularly useful for those who prefer to wash laundry during the night. This feature operates at a reduced noise level, allowing for uninterrupted sleep while the machine runs quietly.

Hotpoint has incorporated advanced technologies in the AQM8F 49 U, including the Smart Sensor technology. This feature automatically adjusts water and electricity consumption based on the load size, promoting energy efficiency and reducing utility costs. The Energy Efficiency Class A++ rating further underscores its eco-friendly design, ensuring that it meets modern sustainability standards.

One of the key highlights of this washing machine is its built-in Steam Hygiene program. This cycle effectively eliminates up to 99.9% of bacteria, making it especially beneficial for families with young children or allergy sufferers. The steam function also helps to reduce wrinkles in clothes, making ironing a quicker task.

Another notable aspect is the delay start feature, which allows users to schedule washes at a more convenient time. This flexibility is perfect for those with busy schedules or for taking advantage of off-peak energy tariffs.

In terms of design, the Hotpoint AQM8F 49 U boasts a sleek and modern appearance, ensuring it blends seamlessly into any laundry room. The intuitive control panel, featuring an easy-to-read display, makes selecting programs straightforward.

In summary, the Hotpoint AQM8F 49 U washing machine combines practical features with advanced technologies to deliver exceptional cleaning performance and efficiency. With its user-friendly design and capacity to handle diverse laundry needs, it continues to be a reliable choice for households seeking a high-quality washing solution.