Replacing the fuse, Removing the plug | Hotpoint AQM8F 49 U specs

Connecting the drain hose

	• the supply voltage is included within the values i ndicated	EN
	on the Technical details table (see page 5);	EN
	on the Technical details table (see page 5);

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug.

If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval.

or:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s

maximum power load indicated in the Technical details table (see page 5);

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

AQM8F 49 U specifications

The Hotpoint AQM8F 49 U is a modern and efficient washing machine designed to meet the diverse laundry needs of households. With a range of innovative features and technologies, it offers convenience, performance, and flexibility, making it a popular choice among consumers.

One of the standout features of the AQM8F 49 U is its large capacity drum, which can accommodate up to 8 kg of laundry. This makes it suitable for larger families or those who have frequent washing needs. The 1400 RPM spin speed ensures effective water extraction, resulting in shorter drying times and energy savings.

The machine is equipped with a variety of wash programs tailored for different fabric types and soil levels. This includes specialized cycles for cotton, synthetics, wool, and delicate items, ensuring that every garment receives optimal care. Additionally, the Night Cycle program is particularly useful for those who prefer to wash laundry during the night. This feature operates at a reduced noise level, allowing for uninterrupted sleep while the machine runs quietly.

Hotpoint has incorporated advanced technologies in the AQM8F 49 U, including the Smart Sensor technology. This feature automatically adjusts water and electricity consumption based on the load size, promoting energy efficiency and reducing utility costs. The Energy Efficiency Class A++ rating further underscores its eco-friendly design, ensuring that it meets modern sustainability standards.

One of the key highlights of this washing machine is its built-in Steam Hygiene program. This cycle effectively eliminates up to 99.9% of bacteria, making it especially beneficial for families with young children or allergy sufferers. The steam function also helps to reduce wrinkles in clothes, making ironing a quicker task.

Another notable aspect is the delay start feature, which allows users to schedule washes at a more convenient time. This flexibility is perfect for those with busy schedules or for taking advantage of off-peak energy tariffs.

In terms of design, the Hotpoint AQM8F 49 U boasts a sleek and modern appearance, ensuring it blends seamlessly into any laundry room. The intuitive control panel, featuring an easy-to-read display, makes selecting programs straightforward.

In summary, the Hotpoint AQM8F 49 U washing machine combines practical features with advanced technologies to deliver exceptional cleaning performance and efficiency. With its user-friendly design and capacity to handle diverse laundry needs, it continues to be a reliable choice for households seeking a high-quality washing solution.