Replacing the fuse, Removing the plug | Hotpoint AQD1170F 697 I

Connecting the drain hose

	• the supply voltage is included within the values indica-	EN
	ted on the Technical Data Plate fixed on the machine.	EN
	ted on the Technical Data Plate fixed on the machine.

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washer-dryer’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of approval.

or:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms

(6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine.

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	Earth
Blue	Neutral
Brown	Live

AQD1170F 697 I, AQD1170F 697 E specifications

The Hotpoint AQD1170F 697 E and AQD1170F 697 I are advanced washer-dryer models that offer a combination of robust cleaning capabilities and innovative features. These appliances are designed to meet the demands of modern households while ensuring energy efficiency and user convenience.

One of the key features of the Hotpoint AQD1170F 697 E and I models is their generous load capacity. With the ability to handle up to 11 kg of washing and 7 kg of drying, these machines cater to larger family needs. This means that users can wash and dry larger batches of laundry in one go, saving both time and energy.

These models come equipped with a variety of wash programs tailored to different fabric types and levels of soiling. The dedicated cycles include options for cottons, synthetics, delicate garments, and even quick wash settings for when time is of the essence. The intelligent sensor technology optimizes water and energy consumption based on the load size, ensuring that resources are used efficiently.

Another remarkable aspect of the Hotpoint AQD1170F series is the Eco Cycle, which provides a more environmentally friendly wash option. This function is particularly beneficial for users who are keen on reducing their ecological footprint while still achieving excellent cleaning results.

The inverter motor technology integrated into these models enhances performance by reducing noise levels and vibrations during operation. This is especially advantageous for households with open-plan living spaces or during nighttime washing cycles. The durability of the inverter motor also contributes to the overall lifespan of the washer-dryer.

Both models also feature a delay start function, allowing users to set the machine to begin washing or drying at a later time, which can be particularly convenient for busy lifestyles. Smart controls and LED displays make it easy to navigate through the various settings and options, ensuring a user-friendly experience.

Furthermore, the Hotpoint AQD1170F 697 E and I are designed with safety features, including child lock options to prevent little hands from accidentally changing settings during operation.

In summary, the Hotpoint AQD1170F 697 E and AQD1170F 697 I washer-dryer models present a perfect blend of versatility, energy efficiency, and advanced technology, making them an excellent choice for modern families looking for a reliable laundry solution. With their impressive capacity and range of features, these machines promise to simplify the laundry process while delivering exceptional results.