Replacing the fuse, Removing the plug | Hotpoint AQM8L 29 I specs

Connecting the drain hose

	• the supply voltage is included within the values indica-	EN
	ted on the Technical Data Plate fixed on the machine;	EN
	ted on the Technical Data Plate fixed on the machine;

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug.

If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of approval.

or:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s

maximum power load indicated in the Technical details table (see page 5);

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

AQM8L 29 I specifications

The Hotpoint AQM8L 29 I is a modern washing machine designed to cater to the needs of busy households while offering a blend of efficiency, reliability, and advanced technology. This model is known for its exceptional cleaning performance and user-friendly features, making it a popular choice among consumers.

One of the standout features of the AQM8L 29 I is its large capacity drum, which allows for up to 8 kg of laundry per load. This makes it an ideal option for families or individuals with a substantial amount of laundry to handle. The machine is designed to accommodate various fabric types, ensuring thorough cleaning without compromising the integrity of the garments.

The AQM8L 29 I incorporates innovative technologies that enhance its performance and energy efficiency. It boasts an A+++ energy rating, which not only helps in saving on utility bills but also contributes to a more sustainable lifestyle. The machine’s Eco Cycle program is designed to use less water and energy while still delivering excellent cleaning results.

Another impressive feature of this washing machine is its wide range of wash programs. Users can select from multiple wash settings, including quick washes, delicate cycles, and intensive cleaning options. This versatility allows users to tailor the wash according to their needs, ensuring optimum care for their clothes.

Furthermore, the Hotpoint AQM8L 29 I is equipped with a unique Anti-Stain technology that actively works to remove tough stains in just one wash. This is particularly beneficial for households with children or individuals who lead active lifestyles, as it simplifies laundry duties without sacrificing cleanliness.

The machine also features a user-friendly digital display, allowing for easy selection of programs and settings. In addition, its delay timer function enables users to schedule washes at convenient times, reducing the disruption to daily routines.

In terms of design, the AQM8L 29 I is sleek and modern, blending seamlessly into any home environment. Its thoughtful engineering ensures minimal vibration and noise during operation, making it a suitable choice for apartments or homes where noise levels are a concern.

In conclusion, the Hotpoint AQM8L 29 I stands out as a reliable and efficient washing machine that combines advanced technology with practical features. Its generous capacity, energy efficiency, extensive wash programs, and stain removal capabilities make it an excellent choice for any modern household.