AEG 16820 manual Programme progress display, Cancelling a programme

Page 15

Description of the appliance

•When the programme has finished, a steadily lit zero is displayed.

•Delayed start, (23 hours max.) programmed using the special button. The countdown is updated every hour.

•Alarm code indicating a fault in the machine operation (see page 37).

Programme progress display

By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

PREWASH WASH

RINSE

EXTRA RINSE

SPIN

DRYING

END

OVERDOSE

DOOR

When the programme has finished, if the OVERDOSAGE light comes on, it indicates that too much detergent has been used or that the drain fil- ter is blocked.

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the O/OFF position.

Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN programme.

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.

Any function can be modified before the machine starts it. After select- ing the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.

15

Image 15

Contents Lavamat Dear customer Contents Automatic washing and drying NON-STOP programme Programme charts wash and special programmesPage Safety instructions General safetyInstallation During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panel Programme Option buttons Position 40C Easy to iron Position Cold = cold wash START/PAUSE button StartPause Display Delayed Start buttonElectronic Drying button Drying Time buttonCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Sort of laundry Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingAdd detergent and additive How to washMax. load Load the laundrySelection of the desired options Selection of the desired wash programmeSelection of the Extra Rinse option Selection of the Delayed Start optionStarting the programme At the end of the programme Drying only Max. load How to dryAutomatic washing and drying NON-STOP programmeWash programmes Programme chartSpecial programmes DescripMax Consumption Tion Drying time Spin speed Mins 1600 Timed DryingDegree of drying Max. loadMax Water Energy Duration Load Litres KWh Minutes Consumption data for timed dryingAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorDrain pump Door sealEmergency emptying out Water inlet filterFrost precautions TroubleshootingSomething not working? Water inlet hose is Problem Possible cause SolutionSomething not working? E10 Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Exclusions Standard Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Front view and side viewRear view Unpacking InstallationInstallation on a suspended floor PositioningLevelling Water inlet cold water connection only Water drainageDo not connect to a hot water supply Interest of the environment Remove the fuse from the cut off plug Electrical connectionsPermanent connection Electrolux plc