AEG 16820 manual Door seal, Drain pump

Page 36

Cleaning and maintenance

To facilitate cleaning, the top part of the additive compartment can be removed.

Detergent can also accumulate inside the drawer recess: clean it with an old tooth- brush.

Refit the drawer after cleaning.

Door seal

Regularly check to see, if there are deposits or foreign objects in the rubber seal behind the door and remove them.

Drain pump

The pump should be inspected regularly and particularly if

the machine does not empty and/or spin

the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows:

Disconnect the appliance.

If necessary wait until the water has cooled down.

Open the pump door.

Place a contain- er close to the pump to collect any spillage.

Release the emergency emp- tying hose, place it in the con- tainer and remove its cap.

When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

36

Image 36
Contents Lavamat Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Safety instructions General safetyInstallation Child safety During useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialProgramme Option buttons Position 40C Easy to ironPosition Cold = cold wash START/PAUSE button StartPause Delayed Start button Electronic Drying buttonDrying Time button DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying Sort of laundryDrying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residueHow to wash Max. loadLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delayed Start option Selection of the Extra Rinse optionStarting the programme At the end of the programme How to dry Automatic washing and dryingNON-STOP programme Drying only Max. loadProgramme chart Wash programmesSpecial programmes DescripMax Consumption Tion Timed Drying Degree of drying Max. load Drying time Spin speed Mins 1600Consumption data for timed drying Max Water Energy Duration Load Litres KWh MinutesCleaning and maintenance Maintenance WashPeriodical cleaning Exterior After each washDoor seal Drain pumpWater inlet filter Emergency emptying outFrost precautions TroubleshootingSomething not working? Problem Possible cause Solution Water inlet hose isSomething not working? Problem Possible cause E10Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Standard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewRear view Installation UnpackingInstallation on a suspended floor PositioningLevelling Water inlet cold water connection only Water drainageDo not connect to a hot water supply Interest of the environment Electrical connections Remove the fuse from the cut off plugPermanent connection Electrolux plc