AEG L 14840 user manual Select the automatic drying by pressing button

Page 19

Use 19

DRYING only

The recommended loads size is 3 kg for cottons and linen, and 2 kg for synthetics (Easy Cares).

Note!Only with the timed drying, it is possible also to dry up to 4 kg of cotton items (see the drying time table).The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe.

Select the drying programme by turning the programme selector dial (1)

Turn the programme selector dial to the required programme for Cottons or Synthetics in the Drying sector. The pilot light 10.2 illuminates.

Select the automatic drying by pressing button 3

With this button you can select the degree of dryness by an electronic drying. The machine adapts automatically the duration of the drying cycle to the selected degree of dryness. The light corresponding to the selected degree illuminates. The display shows the drying cycle duration, calculated by the appliance. The pilot light of button 8 starts blinking. Press then button 8 to start the programme. After the programme has started, the time remaining is updated every minute.

Select the timed drying by pressing button 4

With this button is possible to select the duration of the drying cycle according to the type of fabric (cotton or synthetic). Press button 4, until the time you want appears on the display. For Cottons you can select a drying time from 10 minutes to 250 minutes (4.10). For Synthetics you can select a drying time from 10 minutes to 130 minutes (2.10). Every time you press this button the drying time increases by 5 mins. Press then button 8 to start the programme. The selected drying time on the display decreases by one unit every minute.

Note!

The programme time will automatically increase by up to 2 minutes, this is quite normal.

Note!The different type of cottons (towelling, sheets, shirts, and so on) or eventual laundry rolling up during spinning phase may cause a not uniform dryness. So, in the exceptional case that at the end of the cycle the laundry remains slightly wet, we suggest you to stretch the items rolled up out, to redistribute evenly the laundry in the drum and to select an additional drying cycle of 20-30 minutes.

Image 19
Contents Lavamat L Dear Customer Contents Descaling After each wash Drying onlyPackaging materials Old machine Ecological hints What to do if Technical Data Consumption value InstallationPrior to using for the first time Safety informationGeneral safety Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionControl panel Symbols keyDuration of selected programme DisplayDelay Start Indicator pilot lightsPersonalization Acoustic signalsChild safety lock First UseLoad the laundry Daily UseMeasure out the detergent and the fabric softener Programme option buttons Select the START/PAUSE by pressing button Stain option by pressing button Select the Time option by pressing button Select an additional rinse Extra RinseAltering an option or a running programme Select the Delay Start by pressing buttonInterrupting a programme Opening the door after the programme has started Cancelling a programmeAt the end of the programme Select the timed drying by pressing button Select the automatic drying by pressing buttonAutomatic washing and drying NON-STOP programme White cotton normally soiled cotton items Washing programmesEconomy, lightly Example curtains40 ECO Programme informationEtc Automatic drying programmesDrying time Bathrobes, bath towelsBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryFollowing weights are indicative Laundry weightsRemoving stains Quantity of detergent to be used Detergents and additivesMarked before starting the wash programme As a dryer, the machine works on the condensation principle Preparing the drying cycleDegrees of water hardness Laundry not suitable for dryingDrying cycle duration Gargment’s labelsAdditional drying Care and cleaning Door seal Washing drumDrain pump Care and cleaning Remove any objects from the pump Impeller by rotating it Water inlet filterBack in its seat Screw the pump fully Close the pump door Emergency emptying out Frost precautionsWhat to do if Possible cause/SolutionMachine fills then empties immediately No water is visible in the drum Technical Data Consumption value Unpacking InstallationInstallation Water inlet Positioning and levellingSet the hose correctly by loosening the ring nut Water drainageOnto a sink outlet spigot Brown Live Interest of the environmentElectrical connection Green and Yellow Earth BluePermanent connection Ecological hints Enviroment concernsPackaging materials Old machine132 962 861-01-222008 Subject to change without notice