AEG L 14840 user manual Installation

Page 41

		Installation	41
4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
			C
	C	D	B
HEC0003	C	B
5. Remove the bracket D and tighten up the six
smaller bolts C. Slide out the relevant plastic
spacer E.		E
			C
HEC0023 C

6.Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal.

7.Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.

8.Connect the water inlet hose as described under the paragraph «Water inlet».

All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet.

HEC0010

HEC0005

Image 41

Contents Lavamat L Dear Customer Contents Descaling After each wash Drying onlyPackaging materials Old machine Ecological hints What to do if Technical Data Consumption value InstallationGeneral safety Safety informationPrior to using for the first time Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionControl panel Symbols keyDuration of selected programme DisplayDelay Start Indicator pilot lightsChild safety lock Acoustic signalsFirst Use PersonalizationMeasure out the detergent and the fabric softener Daily UseLoad the laundry Programme option buttons Select the Time option by pressing button Stain option by pressing buttonSelect an additional rinse Extra Rinse Select the START/PAUSE by pressing buttonInterrupting a programme Select the Delay Start by pressing buttonAltering an option or a running programme At the end of the programme Cancelling a programmeOpening the door after the programme has started Select the timed drying by pressing button Select the automatic drying by pressing buttonAutomatic washing and drying NON-STOP programme White cotton normally soiled cotton items Washing programmesEconomy, lightly Example curtains40 ECO Programme informationDrying time Automatic drying programmesBathrobes, bath towels EtcPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryRemoving stains Laundry weightsFollowing weights are indicative Marked before starting the wash programme Detergents and additivesQuantity of detergent to be used Degrees of water hardness Preparing the drying cycleLaundry not suitable for drying As a dryer, the machine works on the condensation principleAdditional drying Gargment’s labelsDrying cycle duration Care and cleaning Drain pump Washing drumDoor seal Care and cleaning Back in its seat Screw the pump fully Close the pump door Water inlet filterRemove any objects from the pump Impeller by rotating it Emergency emptying out Frost precautionsWhat to do if Possible cause/SolutionMachine fills then empties immediately No water is visible in the drum Technical Data Consumption value Unpacking InstallationInstallation Water inlet Positioning and levellingSet the hose correctly by loosening the ring nut Water drainageOnto a sink outlet spigot Electrical connection Interest of the environmentGreen and Yellow Earth Blue Brown LivePermanent connection Packaging materials Enviroment concernsOld machine Ecological hints132 962 861-01-222008 Subject to change without notice