1 4, Two people,one on each side, grasp and lift the dryer onto the washer (see figure 34), taking care not to bend the tabs located towards the front of the washer. Slide the upper dryer towardthe rear makingsure that the guides fall between the rails on the supportof the washer. (See figure 35.)
WARNING: Make sure POWERIS NOT SUPPLIEDTO OUTLET during installation.
When placing the dryer onto the washer, makesure the POWER CORD IS NOT PINCHED between the washer and the dryer or between the exhaust pipe and bracket. If the dryer cannot be pushed all the way back, check to see if the power cord is being pinched between the back of the dryer and the exhaust bracket.
Makesure that
Figure 34 | Figure35 |
15.Check to make sure the tabs on the washer are engaged in slots at the front of the base of the dryer. (See figures36 & 37 - some components removed for clarity.)
Front Right
Dryer
Base
O
Figure36Figure37
Rotateforward to check engagement.
Page 17