6. Select the temperature
Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine.
The relevant light will light up.
90°C
60°C
50°C
40°C
30°C
T |
| R | E |
E | T |
| |
M |
| ||
| P ERA | U |
|
|
|
| |
7.Select the spin speed or the NIGHT WASH option
Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the NIGHT WASH option. The relevant light will light up.
If you select the NIGHT WASH option, the machine will stop at the end of the programme with the water still in the tub.
1600
1200
900
700
NIGHT
WASH
P |
|
| ED | |
S | I | E | ||
|
| N SP |
| |
8. Select the desired options
If your laundry is very dirty, it may be advisable to select the PREWASH option.
If your laundry is lightly or normally soiled and it is necessary to prolong the washing time, select the AA40° option.
If your laundry is only slightly soiled, select the QUICK option.
The relevant light illuminates.
| PREWASH |
| AA40° |
| QUICK |
O | S |
| PTION |
9. Select the DELAY START
Before you start the programme, if you wish the starting to be delayed, press the DELAY START button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 24 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.
DELAY
START
10. Start the programme
Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit.
If you have chosen a delayed start, the washing machine will begin the countdown.
The display will show the duration of the programme or the selected delay.
ST | S | |
| ART/PAU | E |
|
| |
11.How to change a programme during its cycle
Before you make any change, you must pause the machine by pressing the START/PAUSE button.
It is possible to change any phase before the programme carries it out.
Changing the type of fabric or temperature is possible, obviously, only during the washing phase. When you make a change in these two parameters, the machine will resume the cycle from the beginning.
12