Cleaning the filter
The water drain filter
A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every wash.
Open the filter door and |
The water inlet filters
If your water is very hard or contains traces of lime de- posit, the water inlet filters may become clogged.
It is therefore a good idea to clean them from time to time.
Turn off the water taps. Unscrew the water inlet hoses.
| place a container under- |
| neath to catch any spill- |
| age. If the filter is blocked |
| and the machine is unable |
| to drain you will need to |
| drain the water manually |
| from the machine at this |
| stage. To do this, unhook |
P0011 | the drain hose from the |
|
standpipe or sink and hold the end of the hose over a bowl on the floor. The water should drain by gravity into the bowl. When the bowl is full, hook the hose back up and empty the bowl. Repeat the procedure until water stops flowing out.
Unscrew and remove the filter.
P0041 |
Remove and clean the fil- ters using a hard bristle brush. Replace the filters and tighten up the inlet hoses.
P0132 |
P0133 |
Clean carefully under a fast running tap.
P0040
Warning
When the appliance is in use and depending on the pro- gramme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retight- ened so as to stop leaks and young children being able to remove it.
16