•Draining and spin:
-Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme.
-Select spin speed by means of button 5, and press the START/PAUSE button.
•Drain only
-Press the SKIP/RESET button once, so as to cause the DRAIN light to light up, then press the START/PAUSE button.
Important! If you accidentally press the SKIP/RESET button more than once, the display will show three blinking dashes. To drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit).
6 OPTIONS button
Press this button to select the following options:
•PREWASH: select this option if you wish your laundry to be prewashed before the main wash (not available for wool and
The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.
•SUPER RINSE: this option can be selected with all programmes except the wool programme and hand wash. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
7 TIME SAVE button
This button allows you to select the QUICK WASH function, for laundry that is only slightly soiled (not for wool and HAND WASH programme).
The washing time will be reduced according to the type of fabric and the selected temperature.
8 Display
The following pieces of information are shown on the display:
•Three blinking dashes, when a programme is cancelled by means of the SKIP/RESET button.
The three blinking dashes will also appear when you press the ON/OFF button to switch the machine on, if the previously selected cycle has been erased.
•Duration of washing programme in hours and minutes, after you have selected a programme.
2.05
While the programme is running (after you have pressed the START/PAUSE button), the displayed time value decreases by one unit every minute.
•The washing machine has stopped with water in the tub, at the end of a programme with the RINSE HOLD option: this is indicated by a static zero.
•The washing machine has completed the programme: this is indicated by a blinking zero. At the same time, the door locked light goes out. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the SKIP/RESET button.
ENGLISH
11