■ | The door will not open: | ■ The programme is still running. |
|
| ■ The door lock has not been released. |
|
| ■ A programme which stops with water in drum |
|
| has been selected. |
|
| |
■ Spinning starts late or the | ■ The electronic unbalance detection device | |
| machine does not spin: | has cut in because the laundry is not evenly |
|
| distributed in the drum. The laundry is |
|
| redistributed by reverse rotation of the drum. |
|
| This may happen several times before the |
|
| unbalance disappears and normal spinning |
|
| can resume. If, after 10 minutes, the laundry |
|
| is still not evenly distributed in the drum, the |
|
| machine will not spin. In this case, |
|
| redistribute the load manually and reselect |
|
| the spin programme. |
|
| |
■ The machine makes an unusual | ■ The machine is fitted with a commutator | |
| noise: | motor which makes an unusual noise |
|
| compared with other traditional machines. |
|
| This motor enables a softer start to the spin |
|
| and controls the increase in spin speed |
|
| better. In this way, machine performance is |
|
| improved. |
|
| |
■ Water is not visible in the | ■ The machine, which is the result of modern | |
| machine: | technology, runs in a very economical way |
|
| with low water consumption. Performance is |
|
| nevertheless excellent. |
|
|
|
■ | The machine does not dry: | ■ The drying time has not been selected. |
|
| ■ The tap is closed. |
|
| ■ The drain filter is blocked. |
|
| ■ A suitable drying time in the correct sector |
|
| has not been selected. |
|
| ■ The drum is overloaded. |
|
|
|
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
| Mod |
| Prod. No |
P0042 | Ser. No |
|
90