•The washing machine has completed the programme: this is indicated by a flashing zero.
0
Important!
The first time you use the washing machine, when you switch it on, it may display a flashing zero. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.
•An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.
•An alarm code indicates a fault in the machine operation (see the relevant chapter on page
E20
8 “Drying Time” button
By depressing this button you can select a timed programme for cotton or synthetics, the relevant light illuminates.
60
Time 
Drying
Time
For Cottons and Synthetics you can select a drying time from 10 minutes to 130 minutes (2.10).
Every time you press the button the time increases by 5 mins.
9 “Start/Pause” button
This button has two functions:
•Start: after you have selected the desired programme and options, press this button to start the machine. The light above the button will stop flashing and remain lit.
•Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.
Important! You must set the washing machine to PAUSE before you make any change in the programme in progress.
10 Programme phase indicator lights
Function
Drying
End cycle
When you select a programme, all the pilot lights are off.
After you have started the programme, the “Function” light illuminates.
At the end of the washing or drying programme, the “Function” light goes off and the “End cycle” light illuminates.
8