3FIGURE
Loosen hex nut
Desenrosque parcialmente la tuerca hexagonal
Desserrer l’écrou
Sechskantmutter lösen
Insert speaker wire through hole
Inserte el alambre para la bocina en el orificio
Insérer le fil du
Tighten hex nut
Enrosque la tuerca de nuevo
Serrer l’écrou
Sechskantmutter festschrauben
Do not insert insulated section of speaker wire
No inserte alambre con material aislante
Ne pas insérer la partie isolée du fil du
Isolation des Lautsprecher- Drahtes nicht in das Loch schieben
FIGURE 3
Using binding post connections.
Uso de conexiones con tornillos de presión.
Utilisation des bornes de branchement.
Verwendung von Anschlussklemmen.
To use Banana Plugs (US only):
Unscrew the binding post lug nuts completely to expose the binding post plugs (plastic plugs insert- ed into the binding posts). Carefully pry out the binding post plugs to expose banana plug holes. Screw the lug nuts back on the binding posts and insert banana plugs. (This is for US owners only.)
FIGURE 4
FIGURE 4
Option 1, recommended for most systems.
BASS MANAGEMENT SETTINGS: Front = Large
Opción 1, recomendada para la mayoría de los sistemas.
PARÁMETROS DE CONTROL DE BAJAS FRECUENCIAS: Front = Grande (Large)
Option 1, recommandée pour la plupart des systèmes. Réglages: (Bass Management Settings) Front (avant) = Large
Option 1, empfohlen für die meisten Lautsprecher.
EINSTELLUNG DER TIEFENTONLAGEN: Vorne = Groß
5 | HIGH | LEVEL |
| ||
FIGURE |
|
|
|
| SUB OUT |
|
| SEPARATE SUB |
|
| (OPTIONAL) |
6 |
|
|
FIGURE | HIGH | LEVEL |
|
|
FIGURE 5
Option 2, for systems with preamp outputs.
BASS MANAGEMENT SETTINGS:
With NO separate subwoofer: Front = Large Sub = No
WITH separate sub: Front = Large Sub = Yes
Opción 2, para sistemas con salidas de preamplificador.
PARÁMETROS DE CONTROL DE BAJAS FRECUENCIAS:
2a: Front = Grande (Large) | Sub = No |
2b: Front = Grande (Large) | Sub = Sí |
Option 2, pour systèmes avec sorties préamplificateur.
RÉGLAGES: (BASS MANAGEMENT SETTINGS)
2a: Front (avant) = Large | Sub = No |
2b: Front (avant) = Large | Sub = Yes |
Option 2, für Systeme mit
EINSTELLUNG DER TIEFENTONLAGEN:
2a: Vorne = Groß | Subwoofer = Keine |
2b: Vorne = Groß | Subwoofer = Ja |
FIGURE 6
Option 3, for systems with both unfiltered subwoofer outputs and no separate dedicated sub.
BASS MANAGEMENT SETTINGS: Front = Small Sub = Yes
Opción 3, para sistemas con ambas salidas de sub- woofer sin filtrar y sin subwoofer dedicado separado.
PARÁMETROS DE CONTROL DE BAJAS FRECUENCIAS: Front = Pequeño (Small) Sub = Sí
Option 3, pour systèmes avec deux sorties subwoofer sans filtre et sans sortie subwoofer dédiée distincte.
RÉGLAGES: (BASS MANAGEMENT SETTINGS): Front = Small Sub = Yes
Option 3, für Systeme sowohl mit nicht gefilterten
EINSTELLUNG DER TIEFENTONLAGEN: Vorne = Klein Subwoofer = Ja
for more infor mation visit our website at www. polkaudio . com