Operating Sequence
WASHING
Before your first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
1. Load the laundry
Open the door.
Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0404 |
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment .
If you wish to carry out the prewash or soak programme, pour detergent into the compartment marked .
3.Add the fabric softener, if required
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the «MAX» mark in the drawer).
Push the detergent drawer back in.
P0223 |
P0226 |
4. Switch the machine on
Press the ON/OFF button to switch the machine on; three flashing dashes are displayed.
ON - OFF CANCEL
| E TO FI | NI |
|
IM | SH | ||
T |
|
|
11