Zanussi SD 2811 W manual Operating Instructions

Operating Instructions

Congratulations on your new purchase

We recommed that you read these instructions care- fully in order to quickly become familiar with your new appliance.

A good appliance, which is used properly, will serve you for many years.

Unpacking the appliance

Dispose of packing materials in accordance with local regulations and with due regard to safety. Risk of suffocation!.

Check the spin dryer for any transport damages, which must be reported to the retailer or delivery company responsible within 7 days.

Preparation for Use	A
1. Put the operating lever in the “OFF” (0)
position.

2.	Open the lid.
3.	Remove the transport safeguard from inside

Switch on the appliance A

Turn the operating lever to the right as far as it will go to the “ON” (I) position.

The spin dryer is now in operation and water flows out of the outlet spout.

Spin Drying Times

•For normal washing: 3-5 minutes. The residual moisture amounts to:

approx: 65% in machines with a spin speed of 1400 rpm;

approx: 40% in machines with a spin speed of 2800 rpm;

•For washing which requires no ironing: 15-30 seconds max.

Switch off the appliance

When water ceases to flow out of the outlet spout, or when the spin process is to be terminated, turn the operating lever back to the left to the “OFF” (0) position.

the spin drum.

4. We recommend that the spin drum be wiped with

a wet cloth using a solution of water and mild

washing up liquid. Before usingB for the first time.

5.Place the spin dryer on a level floor at a distance of about 50 cm away from the wall or other objects. Never balance out irregularities in the floor surface by laying wood, paper or similar materials under the appliance.

Loading the machine		E
1.	Place a sufficiently large container for excess
	water under the outlet spout.
2.	Plug the appliance in to a mains socket	C
	(please observe the Points of Safety).

3.Place each article of laundry singly in the spin drum. Distribute the washing evenly in the drum and press down firmly, so as to avoid leaving empty spaces (and thus avoiding excessive vibration of the machine during operation).

4.Press the loaded washing down, so that

there is a gap of at least 3 cm between the D

washing and the top edge of the drum.

Lastly, cover the washing with a cloth, the ends of which should be tucked well down inside the drum, so as to avoid items of washing being catapulted out during operation.

5. Close the lid.

When the drum has come to a standstill, open the lid. A special safety device prevents the lid being opened before the drum has stopped spinning.

Never force the lid open

Remove the laundry from the drum.

Gently tilt the spin dryer forward, so that any remaining water can flow out of the outlet spout.

Switch off the power supply. Pull out the plug.

E

5