Something not working?
Before contacting your local Zanussi Service Centre, please make the following checks:
| Problem | Possible cause |
|
|
|
• | The dryer does not work: | • The door is open. |
|
| • The plug is not fitted into the wall socket. |
|
| • There is no electricity supply from the wall socket. |
|
| • The selector dial is not set correctly. |
|
| • The water container is full. |
|
| • The start button has not been depressed. |
|
|
|
• | The dryer does not dry properly: | • The filter is clogged. |
|
| • The water reservoir is full. |
|
| • The condenser is clogged. |
|
| • Insufficient drying time. |
|
| • The selected cycle is not suitable for the laundry. |
|
| • The laundry has not been spun properly. |
|
| • The low temperature function has been |
|
| selected. |
|
| • Excessive laundry load. |
|
| • The dryer is not correctly installed. |
|
|
|
If, after the above checks, there is still a fault, call your local Zanussi Service Centre.
Please make sure you give the model and serial number of the appliance.
This information can be found on the rating plate.
ENGLISH
13